Tone Importing Error
Posted: Fri Sep 08, 2023 10:40 pm
I combined two codeplug files by appending one to the other. I noticed some repeaters stopped working and discovered a bunch of the CTSS tones were wrong. Not just the wrong tone was selected, but the tone itself was wrong.
Not all the tones were wrong, but the following all were each time they appeared in the codeplug (both RX and TX):
107.2 became 107.1
151.4 became 151.3
156.7 became 156.5
162.2 became 162.1
167.9 became 167.8
It didn't matter if one of those tones was listed in RX or TX, it dropped .1 regardless. They all changed, none of those tones properly appeared anywhere in the file. The other tones programmed in seemed ok, like 88.5 and 100.0.
I opened up the exported text files and data in the file is ok. It's only once it's appended or imported (I tried both) do the CTSS values change.
I was using the R2023.08.18.01 version of the CPS, so I upgraded to R2023.09.07.01 but the result was the same.
For some addtional testing, I created a brand new file with one channel per CTSS tone, setting both the TX and RX the same. I then exported it, checked the CSV file for accuracy, and then imported the file into a new CPS file. I found the same discrepancies as in my original file.
I've attached the test files I created, with test being the original and test2 being the imported version.
Not all the tones were wrong, but the following all were each time they appeared in the codeplug (both RX and TX):
107.2 became 107.1
151.4 became 151.3
156.7 became 156.5
162.2 became 162.1
167.9 became 167.8
It didn't matter if one of those tones was listed in RX or TX, it dropped .1 regardless. They all changed, none of those tones properly appeared anywhere in the file. The other tones programmed in seemed ok, like 88.5 and 100.0.
I opened up the exported text files and data in the file is ok. It's only once it's appended or imported (I tried both) do the CTSS values change.
I was using the R2023.08.18.01 version of the CPS, so I upgraded to R2023.09.07.01 but the result was the same.
For some addtional testing, I created a brand new file with one channel per CTSS tone, setting both the TX and RX the same. I then exported it, checked the CSV file for accuracy, and then imported the file into a new CPS file. I found the same discrepancies as in my original file.
Code: Select all
Original File Exported
67.0 67.0
69.3 69.3
71.9 71.9
74.4 74.4
77.0 77.0
79.7 79.6 *
82.5 82.5
85.4 85.4
88.5 88.5
91.5 91.5
94.8 94.8
97.4 97.4
100.0 100.0
103.5 103.5
107.2 107.1 *
110.9 110.9
114.8 114.8
118.8 118.8
123.0 123.0
127.3 127.3
131.8 131.8
136.5 136.5
141.3 141.3
146.2 146.1 *
151.4 151.3 *
156.7 156.6 *
159.8 159.8
162.2 162.1 *
165.5 165.5
167.9 167.8 *
171.3 171.3
173.8 173.8
177.3 177.3
179.9 179.8 *
183.5 183.5
186.2 186.1 *
189.9 189.8 *
192.8 192.8
196.6 196.6
199.5 199.5
203.5 203.5
206.5 206.5
210.7 210.6 *
218.1 218.1
225.7 225.6 *
229.1 229.1
233.6 233.6
241.8 241.8
250.3 250.3
254.1 254.1