Public Beta (2021 11 17)

VK3KYY · Post by **VK3KYY** » Tue Nov 16, 2021 8:44 pm

New public beta which hopefully fixes both the "Settings Update" problem, and the Suspend mode loss of date and time.

This version also includes a fix for operation when the TS filer is disabled.

It does not fix any other problems. e.g. CPS connection etc

https://www.opengd77.com/downloads/PublicBeta_20211117/

Only the firmware file has changed. Not the CPS etc

https://www.opengd77.com/downloads/Publ ... /firmware/

m1dyp · Post by **m1dyp** » Wed Nov 17, 2021 12:27 am

thank you

PU2RMT · Post by **PU2RMT** » Wed Nov 17, 2021 2:53 am

TKS,. Por enquanto tudo funciona bem, 73.

mouseman73 · Post by **mouseman73** » Wed Nov 17, 2021 2:55 pm

What is "_JA" in firmware file names?

KI5PGJ · Post by **KI5PGJ** » Wed Nov 17, 2021 3:19 pm

mouseman73 wrote: ↑
Wed Nov 17, 2021 2:55 pm
What is "_JA" in firmware file names?

I believe Japanese language

VK3KYY · Post by **VK3KYY** » Wed Nov 17, 2021 8:04 pm

Yes

Japanese specific, as they need Japanese characters in the font.
And we can't fit all English ( Latin ) characters in the firmware at the same time because there is not enough space.

In case someone asks... No we can't make a dedicated Chinese version , as they use thousands of pictogram characters and they won't fit even if we did a version with no Latin characters at all

Fecskebeka · Post by **Fecskebeka** » Thu Nov 18, 2021 5:38 pm

All the best!

B2021 11 17 has been running for ~ 20 hours.
Scan mode UHF 16 analog with 8 DMR channels.
There was no rebooting. There was no freezing. It's still running nicely. There is Rx reception. The DMR channel grip is uncertain, it doesn't work.
There were several satellite modes. It was also audible outdoors with a small rubber antenna.
Suspend menu: on. Eco: 2

Comment:
Two radios are on. Unfortunately, one is more than a minute late.
---------
Scan on Boot: on
Suspend: off
Radio off - on
Scanning starts even if there was no scan before turning it off.

Scan on Boot: on
Suspend: on
Radio off - on
Scanning will not start if there was no scan before turning it off.

I understand there was no complete shutdown. But logically strange.

Zsolt

s51d · Post by **s51d** » Thu Nov 18, 2021 7:52 pm

Still Settings update Problem in 5-6 hour qap on DMR mode gd77 made reset - Help turn off

S51D Marko

VK3KYY · Post by **VK3KYY** » Thu Nov 18, 2021 9:20 pm

s51d wrote: ↑
Thu Nov 18, 2021 7:52 pm
Still Settings update Problem in 5-6 hour qap on DMR mode gd77 made reset - Help turn off

S51D Marko

Thanks

One of my GD77 also rebooted. So more work is needed to fix this bug

Fecskebeka · Post by **Fecskebeka** » Fri Nov 19, 2021 11:01 pm

Hi!
Is the noise barrier level interpreted in DMR mode?

Radio option menu
for example
when setting the UHF Squlech level low, the green LED is also lit in DMR mode.
I don't switch to FM listening with
Free
Of course there is no sound. White noise cannot be heard.

If I press the PPT button on the other radio on this channel and then release it.
Then the green LED on this radio is already off.
But soon the LED will turn back on again.

Greeting
73

OpenGD77

Public Beta (2021 11 17)

Public Beta (2021 11 17)

Re: Public Beta (2021 11 17)

Re: Public Beta (2021 11 17)

Re: Public Beta (2021 11 17)

Re: Public Beta (2021 11 17)

Re: Public Beta (2021 11 17)

Re: Public Beta (2021 11 17)

Re: Public Beta (2021 11 17)

Re: Public Beta (2021 11 17)

Re: Public Beta (2021 11 17)