New ongoing "Development" version has been created
Re: New ongoing "Development" version has been created
i know about UP, but this combination is better for me
Re: New ongoing "Development" version has been created
Hi,
QuickKey isn't finished yet, as stated Roger.
To erase a shortcut, long press the assigned key + <SK2>.
Cheers.
---
Daniel
QuickKey isn't finished yet, as stated Roger.
To erase a shortcut, long press the assigned key + <SK2>.
Cheers.
---
Daniel
Re: New ongoing "Development" version has been created
Hi,VK3KYY wrote: ↑Sun Nov 01, 2020 4:53 amAlso we are also aware that on Dual Watch, with the Voice Prompt level 3 enabled, when the Dual Watch stops because a signal is received, the radio should perhaps announce the current frequency, but it does not do this at at the moment.
I am not totally certain, that the radio should announce the frequency, because the operator will not be able to hear the first few seconds of audio.
But I think Ian requested that the frequency was played when the radio stops on a frequency.
I share the uncertainty with you. What about the beeping feedback? (VFO A low beep, VFO B high beep; should be described in the docs)
The user than can read the frequency when cancelling the dual watch on the active VFO...
Re: New ongoing "Development" version has been created
This is still a work in processOK1TE wrote: ↑Mon Nov 02, 2020 10:47 amHi,VK3KYY wrote: ↑Sun Nov 01, 2020 4:53 amAlso we are also aware that on Dual Watch, with the Voice Prompt level 3 enabled, when the Dual Watch stops because a signal is received, the radio should perhaps announce the current frequency, but it does not do this at at the moment.
I am not totally certain, that the radio should announce the frequency, because the operator will not be able to hear the first few seconds of audio.
But I think Ian requested that the frequency was played when the radio stops on a frequency.
I share the uncertainty with you. What about the beeping feedback? (VFO A low beep, VFO B high beep; should be described in the docs)
The user than can read the frequency when cancelling the dual watch on the active VFO...
More updates will be released, probably tomorrow
Re: New ongoing "Development" version has been created
with the November 1st update how can I change the channel name and save it permanently with the gd77? unfortunately the sk2 with green no longer works for that.
Re: New ongoing "Development" version has been created
OK
Looks like one of the QuickKey changes broke this.
One work-around is to change the text and then go up 1 line to the power setting, the press SK2 + GREEN
I'll fix this in the next release
Re: New ongoing "Development" version has been created
I've created a new Development release
https://github.com/rogerclarkmelbourne/ ... 2020.11.03
This is another mixture of bug fixes, and internal code clean-ups
The only new feature change is a new setting on the Display Options screen of "Info:", which controls how the radio displays the TimeSlot and the Power
For the Power, the text will only be displayed in bold, for Channel Specific power, if the Info: option is set to "Pwr" or "Both".
If "Info" is set to TS or Both, then the TS display will change to give more information about how the TS is determined.
When the operator presses the * (STAR) key to override the Channel or TG TS, the TS will be shown in bold font.
If the TS is set because the TG has a TS override, the TS will be shown as "cS1" or "cS2" i.e cS1 = TS1 from the Contact (TG), cS2 = TS2 from the Contact (TG).
Most people on a simplex hotspot probably don't need to use the additional TS information, but operators using DMR MARC may find it useful to have an indication of why the TS is number that it is.
Edit.
No. I can see the Tx CTCSS is set.
Rx CTCSS may have a problem
Yep.
There was a problem with the RxCTCSS.
I've removed some of my latest internal code changes and uploaded again.
So anyone who has already downloaded this version and has a problem with FM Rx, please download again
https://github.com/rogerclarkmelbourne/ ... 2020.11.03
This is another mixture of bug fixes, and internal code clean-ups
The only new feature change is a new setting on the Display Options screen of "Info:", which controls how the radio displays the TimeSlot and the Power
For the Power, the text will only be displayed in bold, for Channel Specific power, if the Info: option is set to "Pwr" or "Both".
If "Info" is set to TS or Both, then the TS display will change to give more information about how the TS is determined.
When the operator presses the * (STAR) key to override the Channel or TG TS, the TS will be shown in bold font.
If the TS is set because the TG has a TS override, the TS will be shown as "cS1" or "cS2" i.e cS1 = TS1 from the Contact (TG), cS2 = TS2 from the Contact (TG).
Most people on a simplex hotspot probably don't need to use the additional TS information, but operators using DMR MARC may find it useful to have an indication of why the TS is number that it is.
Edit.
No. I can see the Tx CTCSS is set.
Rx CTCSS may have a problem
Yep.
There was a problem with the RxCTCSS.
I've removed some of my latest internal code changes and uploaded again.
So anyone who has already downloaded this version and has a problem with FM Rx, please download again
Re: New ongoing "Development" version has been created
Bonjour et merci
trés bien !!!!!
trés bien !!!!!
Re: New ongoing "Development" version has been created
thanks as usual for the update.
Just to inform all this update reset all menu setting
Just to inform all this update reset all menu setting