Page 1 of 1
[Help Requested] Embedded GPS info
Posted: Thu Jan 02, 2020 4:17 am
by F1RMB
Hi all,
I would like to know if someone here knows where I can get some embedded GPS info in-frame (BM TG), or if someone is equipped for this (AFAIK, that doesn't work with chinese HTs, but Hytera ones seems supported), and agree to make some tests with me.
Cheers.
---
Daniel
Re: [Help Requested] Embedded GPS info
Posted: Fri Jan 31, 2020 4:10 am
by Joshoa
Hello
I am an owner of AnyTone AT-D868UV
This HT has GPS and capable of doing digital APRS
Correct me if i wrong but you are looking for a sample of the data packet that contain GPS location data?
If yes - i might be able to help you with that
Also, as far as i know, there is no GPS in GD-77 which is a shame
It would be a great feature in that nice HT
At some moment in time i was thinking that if you guys are so proficient in firmware creation, than it may be possible to add dAPRS in to it?
Hardware wise it should not be an extremely hard task - modern GNSS/GPS modules are small, lightweight and consume not that much of an energy
Standard NMEA protocol is also pretty easy to decode
So it seems to me that you are exploring this idea
Am i right?
Joshoa
Re: [Help Requested] Embedded GPS info
Posted: Fri Jan 31, 2020 10:37 am
by SP2ONG
And he can also enter options in CPS for entering coordinates manually and if they are GD-77 will send dAPRS positions
or, for example, from the OpenGD77 menu control on the radio, you enter coordinates or maybe the locator grid which will be used to convert to the coordinates of the center of the square and send the dAPRS position. Some radios that have GPS allow you to enter the coordinates manually instead of those taken from GPS
Re: [Help Requested] Embedded GPS info
Posted: Fri Jan 31, 2020 12:00 pm
by ea3ihi
Hello Daniel, I can capture some dmr frames with my hotspot, the anytone 878uv, and some of my nodejs based utilities which allows me to run my own server. Do you have some special requirements for the capture?
I attach a sample of how the data will look like.
David
Re: [Help Requested] Embedded GPS info
Posted: Fri Jan 31, 2020 12:31 pm
by F1RMB
Hi David,
ea3ihi wrote: ↑Fri Jan 31, 2020 12:00 pm
Hello Daniel, I can capture some dmr frames with my hotspot, the anytone 878uv, and some of my nodejs based utilities which allows me to run my own server. Do you have some special requirements for the capture?
I attach a sample of how the data will look like.
David
It would be nice to comment some field in the attached data, until callType (which looks like TG), it's fine, but after that it's unclear to me.
About defining a Maidenhead locator (short version, 6 chars) in the settings, and sending converted coordinates packed into a handmade LC 0x08 data packet wouldn't be that complicated (we are already able to send TA), but I need Roger's advice for this.
Cheers.
---
Daniel
Re: [Help Requested] Embedded GPS info
Posted: Fri Jan 31, 2020 3:00 pm
by ea3ihi
Helo, find attached some dmr frames with aprs data sent to the tg 214999 which is the one we use in Spain.
{"signature":"DMRD","seq":4,"source":2143827,"destination":214999,"repeaterId":2143827,"slot":1,"callType":1,"frameType":2,"dataType":6,"voiceSeq":6,"streamId":3541696321,"data":{"type":"Buffer","data":[67,254,21,44,67,219,115,219,162,35,39,171,5,141,93,127,119,253,117,115,56,89,112,74,250,129,7,131,195,134,17,180,155,0,52]}}
Calltype: TG or PC
FrameType: enum DMRFrameType {
VOICE,
VOICE_SYNC,
DATA_SYNC,
UNUSED
}
DMRDataType: enum DMRDataType {
PRIVACY_INDICATOR,
VOICE_HEADER,
VOICE_TERMINATOR,
CSBK,
MULTIBLOCK,
MULTIBLOCK1,
DATA,
RATE12DATA,
RATE34DATA,
IDLE,
BURST_A,
BURST_B,
BURST_C,
BURST_D,
BURST_E,
BURST_F
}
dataType and voiceSeq are the same, just two names of the same data field and its meaning depends if is voice or data.
The information contained should be something like:
41.399901N
002.183680E
2020-01-31
15:57:21
V0.0M/S
H19.1
Hope it is helpful
David
Re: [Help Requested] Embedded GPS info
Posted: Fri Jan 31, 2020 3:07 pm
by F1RMB
Hi David,
ea3ihi wrote: ↑Fri Jan 31, 2020 3:00 pm
Helo, find attached some dmr frames with aprs data sent to the tg 214999 which is the one we use in Spain.
{"signature":"DMRD","seq":4,"source":2143827,"destination":214999,"repeaterId":2143827,"slot":1,"callType":1,"frameType":2,"dataType":6,"voiceSeq":6,"streamId":3541696321,"data":{"type":"Buffer","data":[67,254,21,44,67,219,115,219,162,35,39,171,5,141,93,127,119,253,117,115,56,89,112,74,250,129,7,131,195,134,17,180,155,0,52]}}
Calltype: TG or PC
FrameType: enum DMRFrameType {
VOICE,
VOICE_SYNC,
DATA_SYNC,
UNUSED
}
DMRDataType: enum DMRDataType {
PRIVACY_INDICATOR,
VOICE_HEADER,
VOICE_TERMINATOR,
CSBK,
MULTIBLOCK,
MULTIBLOCK1,
DATA,
RATE12DATA,
RATE34DATA,
IDLE,
BURST_A,
BURST_B,
BURST_C,
BURST_D,
BURST_E,
BURST_F
}
dataType and voiceSeq are the same, just two names of the same data field and its meaning depends if is voice or data.
The information contained should be something like:
41.399901N
002.183680E
2020-01-31
15:57:21
V0.0M/S
H19.1
Hope it is helpful
David
Yeah, I will look closer. Thanks for all the details.
Cheers.
---
Daniel
Re: [Help Requested] Embedded GPS info
Posted: Wed Sep 06, 2023 3:35 am
by VK3KYY
Joshoa wrote: ↑Fri Jan 31, 2020 4:10 am
Hello
I am an owner of AnyTone AT-D868UV
This HT has GPS and capable of doing digital APRS
Correct me if i wrong but you are looking for a sample of the data packet that contain GPS location data?
If yes - i might be able to help you with that
Also, as far as i know, there is no GPS in GD-77 which is a shame
It would be a great feature in that nice HT
At some moment in time i was thinking that if you guys are so proficient in firmware creation, than it may be possible to add dAPRS in to it?
Hardware wise it should not be an extremely hard task - modern GNSS/GPS modules are small, lightweight and consume not that much of an energy
Standard NMEA protocol is also pretty easy to decode
So it seems to me that you are exploring this idea
Am i right?
Joshoa
What is your callsign ? Accounts without callsigns will soon be purged