UV380 reboot loop
UV380 reboot loop
Hello there!
I just got a MD UV380 on eBay and tried to load OpenGD77 on it, both the 12-31-23 and 4-12-24 versions and the 4-30-24 CPS but end up in what looks like a boot loop with just the title "OpenGD77" being readable for about a half a second.
Using the TYT Firmware Downloader I have been able to flash back to the stock fw. Attached is the info from the v1.20 TYT CPS after reading the radio.
Could it be related, as well, when I run the installer for the OpenGD CPS the wdi installer seems to hang as well then close itself.
Cheers!
I just got a MD UV380 on eBay and tried to load OpenGD77 on it, both the 12-31-23 and 4-12-24 versions and the 4-30-24 CPS but end up in what looks like a boot loop with just the title "OpenGD77" being readable for about a half a second.
Using the TYT Firmware Downloader I have been able to flash back to the stock fw. Attached is the info from the v1.20 TYT CPS after reading the radio.
Could it be related, as well, when I run the installer for the OpenGD CPS the wdi installer seems to hang as well then close itself.
Cheers!
- Attachments
-
- uv380info.png (10.11 KiB) Viewed 975 times
Re: UV380 reboot loop
Try to boot the OpenGD77 with SK2 + Down key held down.
Re: UV380 reboot loop
Just did a flash of 4-12 and it immediately started to boot loop but when I held down SK2 "Settings Updated" flashes on the screen before it turns off and back on again.
Re: UV380 reboot loop
You need to held down down arrow key and SK2 before powering up,
Re: UV380 reboot loop
It’s giving the same result.
Re: UV380 reboot loop
Okay.
Re: UV380 reboot loop
So, let me ask few things.
Did you tried to re-download the latest firmware (latest beta), and flash it ?
Does the "Firmware loader" window title displays '[+DMR]' string ?.
Running the manufacturer's firmware/CPS, did you tried to flash a simple codeplug (like 2 channels, one zone, etc), then flash back the OpenGD77 ?
Did you tried to re-download the latest firmware (latest beta), and flash it ?
Does the "Firmware loader" window title displays '[+DMR]' string ?.
Running the manufacturer's firmware/CPS, did you tried to flash a simple codeplug (like 2 channels, one zone, etc), then flash back the OpenGD77 ?
Re: UV380 reboot loop
Before we get any further, I want to thank you for the assistance!
the OpenGD77 CPS does show the [ +DMR ] in the title bar, and I did just try with a fresh code plug that has my (turned off) hotspot frequency with a 4000 and 1 talkgroup contact channel.
After downloading a fresh beta and following all the steps ends up with the flash with the same result of restarting at the title screen.
the OpenGD77 CPS does show the [ +DMR ] in the title bar, and I did just try with a fresh code plug that has my (turned off) hotspot frequency with a 4000 and 1 talkgroup contact channel.
After downloading a fresh beta and following all the steps ends up with the flash with the same result of restarting at the title screen.
Re: UV380 reboot loop
Hmmm, really strange.
Could you send me an email, I will ask you to test few things, using a special firmware.
BTW, you wrote that the CPS installed closed itself, that is also weird. Which Windows version are you running ?
Cheers.
---
Daniel
Could you send me an email, I will ask you to test few things, using a special firmware.
BTW, you wrote that the CPS installed closed itself, that is also weird. Which Windows version are you running ?
Cheers.
---
Daniel
Re: UV380 reboot loop
Totally, my email is dbaker20.db@gmail.com,
I’m not sure how to find your email address, my apologies.
I’m not sure how to find your email address, my apologies.