aprs how to use

Post Reply
ams123
Posts: 5
Joined: Fri Mar 12, 2021 6:13 pm
Location: Amersfoort
Contact:

aprs how to use

Post by ams123 » Sun Apr 18, 2021 8:10 am

i have a Baofeng 1801 running on opengd77 how i can use the aprs on it

greetz frp Arie PD2ARI

VK3KYY
Posts: 8143
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: aprs how to use

Post by VK3KYY » Sun Apr 18, 2021 10:31 am

ams123 wrote:
Sun Apr 18, 2021 8:10 am
i have a Baofeng 1801 running on opengd77 how i can use the aprs on it

greetz frp Arie PD2ARI
Please exmplain in more detail.

Do you mean transmission of DTMF tones?

User avatar
DU2XXR
Posts: 191
Joined: Thu Nov 28, 2019 5:25 am
Location: Philippines
Contact:

Re: aprs how to use

Post by DU2XXR » Mon Apr 19, 2021 3:52 am

Hello.

APRS on DMR mostly relates to 2 things:

1. Position beaconing -- this is taken care of by the APRS settings on BrandMeister selfcare. You can then define GPS coordinates on your hotspot via MMDVM.ini or through pi-star dashboard. Some radios that have GPS will pass the location information from the radio to the network (e.g. Ailunce HD1).

2. Messaging -- you can send messages between DMR and native APRS. BrandMeister Master Servers have APRS gateways.

You can do #1 via your hotspot and the BM SelfCare APRS settings. When your hotspot is connected to the network, it will beacon via APRS-IS. I recommend you set your refresh rate to 600 seconds (the max that BM settings has). Otherwise, it might flood the system. I, myself, have blocked position beacons from BrandMeister network from being gated to RF on my iGate/Digipeater because of this.

Regarding #2, unfortunately openGD77 does not support DMR messaging. The stock firmware does, though.

Post Reply