GD77S TG9 not heard
Re: GD77S TG9 not heard
IDK if it is relevant for OpenSpot, but just a reminder: 9990 kind of parrot doesn't live in every server, but MCC997 does (where MCC is first 3 digits of server used).
Re: GD77S TG9 not heard
Thanks for looking into this! The OpenSpot is set to transmit/receive on 433.95 and only uses TS1. A few months back, the filter menu no longer appeared when using a GD77S. I posted on it here and a new firmware fix was posted. Since then, the Filter Menu is back and we are able to select "none". I only mention it because I don't have any way to tell is it is functioning properly, only that it is present and selectable. I appreciate all your help with this!!
Re: GD77S TG9 not heard
OK. CoolKA5ZDA wrote: ↑Sun Apr 18, 2021 4:47 pmThanks for looking into this! The OpenSpot is set to transmit/receive on 433.95 and only uses TS1. A few months back, the filter menu no longer appeared when using a GD77S. I posted on it here and a new firmware fix was posted. Since then, the Filter Menu is back and we are able to select "none". I only mention it because I don't have any way to tell is it is functioning properly, only that it is present and selectable. I appreciate all your help with this!!
I think possibly by default the TG filter had to be enabled on the GD77S, as there was no way for the operator to know if the incoming TG was the currently selected TG or not.
However if you have a version with the filter menu working again, you should be OK now.