-
DO4CZ
- Posts: 63
- Joined: Sat Nov 16, 2019 8:55 am
- Location: near Rostock, Germany
Post
by DO4CZ » Sat Nov 26, 2022 10:55 am
Hello Roger, with the new beta, umlauts (German language) are no longer/not correct displayed.
With the beta from 11/18/2022 it was ok!
-
Attachments
-
- Ö2 nicht ok.png (3.58 KiB) Viewed 2944 times
-
- Ö nicht ok.png (3.06 KiB) Viewed 2944 times
-
- Ä nicht ok.png (2.93 KiB) Viewed 2944 times
-
VK3KYY
- Posts: 8143
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Sat Nov 26, 2022 7:43 pm
DO4CZ wrote: ↑Sat Nov 26, 2022 10:55 am
Hello Roger, with the new beta, umlauts (German language) are no longer/not correct displayed.
With the beta from 11/18/2022 it was ok!
Sorry
Somehow I saved the file in the wrong encoding
I will revert to the old file and add the new texts again
-
DO4CZ
- Posts: 63
- Joined: Sat Nov 16, 2019 8:55 am
- Location: near Rostock, Germany
Post
by DO4CZ » Sat Nov 26, 2022 9:12 pm
VK3KYY wrote: ↑Sat Nov 26, 2022 7:43 pm
Sorry
Somehow I saved the file in the wrong encoding
I will revert to the old file and add the new texts again
Ok, thank you Roger.
-
VK3KYY
- Posts: 8143
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Sat Nov 26, 2022 9:18 pm
DO4CZ wrote: ↑Sat Nov 26, 2022 9:12 pm
VK3KYY wrote: ↑Sat Nov 26, 2022 7:43 pm
Sorry
Somehow I saved the file in the wrong encoding
I will revert to the old file and add the new texts again
Ok, thank you Roger.
No worries
I've rechecked all the language files and I only seem to have damaged the german file
I'm trying to fix it now
-
DO4CZ
- Posts: 63
- Joined: Sat Nov 16, 2019 8:55 am
- Location: near Rostock, Germany
Post
by DO4CZ » Sun Nov 27, 2022 6:36 am
Roger, flashed the new beta and everything is fine now.
Thanks
-
VK3KYY
- Posts: 8143
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Sun Nov 27, 2022 7:30 am
DO4CZ wrote: ↑Sun Nov 27, 2022 6:36 am
Roger, flashed the new beta and everything is fine now.
Thanks
OK
-
VK3KYY
- Posts: 8143
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Tue Nov 29, 2022 4:18 am
-
m1dyp
- Posts: 605
- Joined: Sat Nov 16, 2019 8:03 am
- Location: Hertfordshire, U.K.
-
Contact:
Post
by m1dyp » Tue Nov 29, 2022 12:24 pm
VK3KYY wrote: ↑Sat Nov 26, 2022 7:47 am
when does the message occur
can you screengrab the message, as I can't find anywhere in the CPS that contains the text "no connection"
Did you try resetting the settings?
panic over, used my win 10 pc and it read it straight away, need to look at win 7 pc com ports.........
-
VK3KYY
- Posts: 8143
- Joined: Sat Nov 16, 2019 3:25 am
- Location: Melbourne, Australia
Post
by VK3KYY » Tue Nov 29, 2022 7:06 pm
m1dyp wrote: ↑Tue Nov 29, 2022 12:24 pm
VK3KYY wrote: ↑Sat Nov 26, 2022 7:47 am
when does the message occur
can you screengrab the message, as I can't find anywhere in the CPS that contains the text "no connection"
Did you try resetting the settings?
panic over, used my win 10 pc and it read it straight away, need to look at win 7 pc com ports.........
I have not tested on W7 for over a year, because most of my PCs are now running W10-LTSB
However the driver has not changed
