thanks o will try thatDO4CZ wrote: ↑Thu Dec 12, 2019 9:35 am
@ m1dyp
I use Win 10 1909 64bit and everything works (COM port)
If you can not fix the problem with the com port, the "BlueDV-9558-preBETA" is also great
http://software.pa7lim.nl/BlueDV/BETA/W ... reBETA.zip
OpenGD77 with BlueDV for Windows
Re: OpenGD77 with BlueDV for Windows
Re: OpenGD77 with BlueDV for Windows
Works great.
Thank you very much.
Thank you very much.
Re: OpenGD77 with BlueDV for Windows
My bad. I plugged in the radio to the swr meter but the actual antenna cable was unplugged (I usually remove it as a lightning precaution).
As per my last check I was able to reach around 3Km at 3w with rolling terrain.
As per my last check I was able to reach around 3Km at 3w with rolling terrain.
Re: OpenGD77 with BlueDV for Windows
oops. yeah antenna helps lol.
wish it was that simple with my com port.
never mind, at least I still have android and raspberry
wish it was that simple with my com port.
never mind, at least I still have android and raspberry
Re: OpenGD77 with BlueDV for Windows
OMG
I found this on another forum (isnt google wonderful)
"response from David PA7LIM which was to "Please select an YSF reflector in the setup."
when I looked in settings, mine was blank, so I randomly chose one, saved it and hey presto.....
I found this on another forum (isnt google wonderful)
"response from David PA7LIM which was to "Please select an YSF reflector in the setup."
when I looked in settings, mine was blank, so I randomly chose one, saved it and hey presto.....
- Attachments
-
- dv2.jpg (220.08 KiB) Viewed 5709 times
Re: OpenGD77 with BlueDV for Windows
To adjust a YSF Reflector should not have a single foot in DMR.
YSF (Yaesu Fusion) has nothing to do with DMR, it should work that way.
Or did you activate Fusion?
With GD-77 we only need to switch on serial and DMR
I didn't do it, just set up and finished DMR.
Worked right away.
YSF (Yaesu Fusion) has nothing to do with DMR, it should work that way.
Or did you activate Fusion?
With GD-77 we only need to switch on serial and DMR
I didn't do it, just set up and finished DMR.
Worked right away.
Re: OpenGD77 with BlueDV for Windows
yes it is strange I agree, but as soon as I did it the error message went and it worked
I cannot explain why, I can only report what happens
Re: OpenGD77 with BlueDV for Windows
Yes, ok, it was not like this ...
Re: OpenGD77 with BlueDV for Windows
m1dyp wrote: ↑Thu Dec 12, 2019 10:01 amDO4CZ wrote: ↑Thu Dec 12, 2019 9:35 am
@ m1dyp
I use Win 10 1909 64bit and everything works (COM port)
If you can not fix the problem with the com port, the "BlueDV-9558-preBETA" is also great
http://software.pa7lim.nl/BlueDV/BETA/W ... reBETA.zip
that version works straight away