Changing zones on the RT3S running Opengd77 firmware

[VK1VLV]

In the Opengd77 instruction manual it says:
Changing zones
Pressing Function + Up arrow or Function + Down arrow changes to the next or previous zone, respectively.

This instruction refers to the Opengd77 radio which has both up and down arrow buttons and left and right arrow buttons.

Would someone please explain if there is a similar shortcut to change zones on the RT3S running the Opengd77 firmware, and if so, how to do it. I.e. There are no left and right buttons on the RT3S and the up and down buttons increase and decrease the power, not the Zones.

Thank you in advance.

[LB9AB]

Press function and rotate channel knob

[F1RMB]

In the Opengd77 instruction manual it says:
Changing zones
Pressing Function + Up arrow or Function + Down arrow changes to the next or previous zone, respectively.

This instruction refers to the Opengd77 radio which has both up and down arrow buttons and left and right arrow buttons.

Would someone please explain if there is a similar shortcut to change zones on the RT3S running the Opengd77 firmware, and if so, how to do it. I.e. There are no left and right buttons on the RT3S and the up and down buttons increase and decrease the power, not the Zones.

Thank you in advance.

You have a section in the manual that explains the differences between supported platforms, slightly above the Changing zones one:
https://github.com/LibreDMR/OpenGD77_Us ... ted-radios

[VK1VLV]

Thanks very much LB9AB. Fantastic. Takk.

[VK1VLV]

Thanks as well to F1RMB. Not sure how I missed the info you mention. Anyway, found it now - very helpful. Merci