OpenGD77

KA1CM wrote: ↑

Sat May 24, 2025 6:39 pm

ve2ymm wrote: ↑

Sat May 24, 2025 5:53 pm

Unfortunately, I cannot find this menu on my TYT 390-Plus, the button SK1+green button do not show this menu.

Yves,
ve2ymm.com

That is very weird, are you sure you were pressing the right keys?

Read the manual link in the previous post

Specifically

"On the TYT MD-UV380 press SK1 and the Green button"

Yes I’m sure

It is the model “plus”, perhaps there is a difference?

Yves,
Ve2ymm.com

ve2ymm wrote: ↑

Sat May 24, 2025 8:40 pm

Yes I’m sure

It is the model “plus”, perhaps there is a difference?

Yves,
Ve2ymm.com

There is no hardware difference related to the keypad and buttons

Hold sk1 and press green

Assuming the sk1 ang green buttons are functional

I can send you a video. There is no action when I press the SK1 and the green button.

PS : I have described in details an article on my web site about the DMR and also the TYT 390 Plus : https://ve2ymm.com/dmr#pgm_md380

Yves,
Ve2ymm.com

I got it! It is a bit tricky, I have to click once on SK1 then TWICE on the green key. This is not described here. I’ve finally activated the TS filter.

Yves,
Ve2ymm.com

ve2ymm wrote: ↑

Sun May 25, 2025 1:22 am

I got it! It is a bit tricky, I have to click once on SK1 then TWICE on the green key. This is not described here. I’ve finally activated the TS filter.

Yves,
Ve2ymm.com

Sounds like your radio has intermittent faults on the keypad. The ribbon cable to the front panel may need to be reseated

I don’t think this is mechanic, it seems to be a bug because now it works perfectly. A timeout setting or something. I have a second 390 Plus. I have to flash the firmware for openGD77 and see if I have the same issue.

The TS filter was off, I set it on. I hope this will work.

Yves,
Ve2ymm.com

Additional note regarding the TYT/MD-390 Plus: The "Quick Menu" option is available by pressing the "SK1" keys + the "green" button. On my "TYT 390 Plus," I have to press the green button a second time (while holding down the SK1 button) to activate the menu.

I've run numerous tests since yesterday, and it's always the same. Sometimes pressing the green button once is enough, but 90% of the time, I have to press it a second time. This doesn't happen with other SK1 key combinations, and I also have no problem using the green button to access the menus. It's really the combination of these two keys that seems to be causing the problem with my TYT 390 Plus.

Yves,
ve2ymm.com

And don't you find it strange to be the only one experiencing this?!
Personally, this surprises me...

Oh, BTW, I'm suggesting that you fix the webpage you mentioned above, the radio model is MD-UV380 and/or MD-UV390, NOT the MD-380 and/or MD-390, these ones are unsupported by the OpenGD77.

Thanks.