MD-9600 / RT-90 Installation

User avatar
F1RMB
Posts: 3426
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: MD-9600 / RT-90 Installation

Post by F1RMB » Mon May 13, 2024 4:54 pm

Hi,


- MD-9600 installation instruction:
viewtopic.php?f=18&t=2035

- Latest beta:
viewtopic.php?f=18&t=3980 (MD9600_firmware_HW_V5.zip is for the V5 hardware).

- CPS:
viewtopic.php?f=12&t=4049#p31220

If you click on the "Board index", everything is ordered, per transceiver model, etc.



Cheers.
---
Daniel

SA0BUX
Posts: 873
Joined: Tue Jul 05, 2022 8:50 am
Location: JO99ah, Stockholm, Sweden
Contact:

Re: MD-9600 / RT-90 Installation

Post by SA0BUX » Mon May 13, 2024 5:17 pm

KD9WPD wrote: ↑
Mon May 13, 2024 4:19 pm
Hello all! I recently purchased an TYT MD-9600 Plus with GPS, and an TYT MD-UV390 Plus (so called 10W version). One of the key reasons I got these was for their potential to run OpenGD77. I have started to embark on getting the 9600 transitioned. The 390 will come after as I want to focus on one at a time.

Anyway, I have run into a stumbling block early on in the process. I opened my 9600 to see what version it is and learned it is a revision 5. As I understand it, I need version 5 specific files for:
  • donor firmware (OEM?)
The donor file is the same for all radios.
It's in this file https://www.passion-radio.com/index.php ... chment=760

Filename is MD9600-CSV(2571V5)-V26.45.bin
  • OpenGD77 firmware
downloads/MD9600/Firmware/Latest
  • OpenGD77 CPS
downloads/PC_CPS/Latest/

I am having trouble locating these files using the links provided in the instructions in the 1st post. Indeed I haven't had any luck with trying to locate them via general web searches either. Is V5 not yet supported by OpenGD77? If it is supported, how should I proceed? Any help is appreciated.

KD9WPD
Posts: 5
Joined: Sat May 11, 2024 7:35 pm

Re: MD-9600 / RT-90 Installation

Post by KD9WPD » Mon May 13, 2024 5:53 pm

Wow! Thanks for the fast help guys. So the V4 donor file is universal because it is really just the codec that is being harvested from it, correct? Okay. Also, the OpenGD77 CPS doesn't have to be V5 specific either; just go with the latest version and it covers any version (and even other radios too)? Perfect. I did get the V5 specific OpenGD77 firmware for my MD-9600; excellent. That sounds like all the the minimum pieces are in place, fantastic!

Next though, when I read through some stuff on here I believe it was strongly advised that one acquires the specific version of the OEM firmware for their radio, not necessarily just for donating the codec, but as a way to return the radio to original if desired. That I don't have. Where might a trusted source for that be, or can it be read from my radio itself? If it isn't possible to get that it's not necessarily a show stopper for me, as I intend to stick with OpenGD77 anyway once it is in place. Still though, if it's available I think it's good to have around.

And finally, I noticed some Linux drivers for this process? I'm a Linux user, but I can (and do) do radio programming via a Windows 10 VM for which I pass through the relevant USB ports. Windows doesn't seem to know the difference (as expected by design). I have successfully used the TYT CPS with this 9600 with that approach and it has been 100% working. Given that, should I just ignore any available Linux drivers here and proceed as if I truly am fully doing everything under Windows? Or is there perhaps more to consider? Thoughts?

By the way, you guys are awesome for your generosity and willingness to help. I appreciate it very much! Thank you.

User avatar
F1RMB
Posts: 3426
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: MD-9600 / RT-90 Installation

Post by F1RMB » Mon May 13, 2024 6:10 pm

KD9WPD wrote: ↑
Mon May 13, 2024 5:53 pm
Wow! Thanks for the fast help guys. So the V4 donor file is universal because it is really just the codec that is being harvested from it, correct? Okay. Also, the OpenGD77 CPS doesn't have to be V5 specific either; just go with the latest version and it covers any version (and even other radios too)? Perfect. I did get the V5 specific OpenGD77 firmware for my MD-9600; excellent. That sounds like all the the minimum pieces are in place, fantastic!
The donor file is universal for the STM32 devices.

KD9WPD wrote: ↑
Mon May 13, 2024 5:53 pm
Next though, when I read through some stuff on here I believe it was strongly advised that one acquires the specific version of the OEM firmware for their radio, not necessarily just for donating the codec, but as a way to return the radio to original if desired. That I don't have. Where might a trusted source for that be, or can it be read from my radio itself? If it isn't possible to get that it's not necessarily a show stopper for me, as I intend to stick with OpenGD77 anyway once it is in place. Still though, if it's available I think it's good to have around.
The original firmware can be found, check passion-radio.fr (check the installation instructiions).

KD9WPD wrote: ↑
Mon May 13, 2024 5:53 pm
And finally, I noticed some Linux drivers for this process? I'm a Linux user, but I can (and do) do radio programming via a Windows 10 VM for which I pass through the relevant USB ports. Windows doesn't seem to know the difference (as expected by design). I have successfully used the TYT CPS with this 9600 with that approach and it has been 100% working. Given that, should I just ignore any available Linux drivers here and proceed as if I truly am fully doing everything under Windows? Or is there perhaps more to consider? Thoughts?

By the way, you guys are awesome for your generosity and willingness to help. I appreciate it very much! Thank you.
The CPS works on Windows only.
I'm also a Linux user. You will need the udev file, and you could use a python script to flash the fimware.
For the udev file downloads/releases/MD9600/R20231231/sources_and_tools/
The python script is localted in the latest source archive (OpenGD77_MD9600_20231231.zip), /OpenGD77_MD9600_20231231/MD9600_firmware/tools/opengd77_stm32_firmware_loader.py


Cheers.
---
Daniel

KD9WPD
Posts: 5
Joined: Sat May 11, 2024 7:35 pm

Re: MD-9600 / RT-90 Installation

Post by KD9WPD » Mon May 13, 2024 8:35 pm

Thanks Daniel. I have tried my best Google-Fu to find the V5 OEM firmware & finally found one! Yay. I found it here:

https://www.passion-radio.fr/index.php? ... hment=1189

KD9WPD
Posts: 5
Joined: Sat May 11, 2024 7:35 pm

Re: MD-9600 / RT-90 Installation

Post by KD9WPD » Tue May 14, 2024 1:08 am

Mixed bag. I was able to use the OpenGD77 CPS to load the V5 OpenGD77 firmware for the radio. I used the donor file which was in the instructions etc. All seemed to go well. I have power cycled the radio to reboot it. the new OpenGD77 firmware is present and responsive. So that part appears to be all good.
Now the trouble is I can't use the OpenGD77 CPS to read the radio, as no appropriate COM port is available to pick. This is mirrored by the device manager which shows no com ports (which aren't already spoken for). It looks like a driver issue. Now that the radio is GD77, I suppose it is no longer seen by the OS as matching any current driver. Please let me know your thoughts.
Uhm nevermind. The issue was I had to do a little update to the USB device mapping in VirtualBox so it got passed onto the Windows VM. I can read a codeplug now.


Thanks again.

OZ1FTG
Posts: 55
Joined: Fri Mar 29, 2024 3:52 pm

Re: MD-9600 / RT-90 Installation

Post by OZ1FTG » Tue Jun 25, 2024 2:40 pm

I'm having a MD-9600 on the way from CN, have no idea if it's a V4 or V5.
Any way to determine if it's a V4 or V5 or ??? - Besides opening it up ?

Any significant "deviations" from 1701 a install ... Besides another FW ?
Are the instructions in this first post still valid ?
viewtopic.php?f=18&t=2035


I got my MD-9600 - Serial is : 2401A0xxx
Is there any way to determine the revision number from the SN ?

Edit: Install story continues here - viewtopic.php?f=18&t=4211&p=32001#p32001
.

GM4SVM
Posts: 8
Joined: Mon Mar 22, 2021 11:50 am

Re: MD-9600 / RT-90 Installation

Post by GM4SVM » Thu Sep 19, 2024 9:59 am

I have a problem installing Open GD77 on a TYT MD-9600
It is a V2 hardware radio.

Story so far:

I installed the original TYT CPS
Read from the radio to make a backup of original config

Downloaded donor firmware from "passion radio"

Downloaded the correct (or I hope correct) Open GD77 firmware from downloads/MD9600/Firmware/44be916f1416c ... 6e505b3cd/

Opened the Open GD77 CPS (latest non beta version which I use for another radio).

Went to firmware update and selected the donor and new firmware files.

Now I get the error "official donor firmware version is not correct"
So I went back to "passion radio" and downloaded a fresh copy
Got the same error.

So, either there is a compatibility issue, or the donor file is twice corrupted, or that error message is being generated by another fault.
I tried searching the forum for that error message, but it excludes too many words and doesn't find anything.

Any pointer in the right direction would be appreciated as I don't believe the donor firmware is at fault here.

GM4SVM
Posts: 8
Joined: Mon Mar 22, 2021 11:50 am

Re: MD-9600 / RT-90 Installation

Post by GM4SVM » Thu Sep 19, 2024 10:24 am

Apologies its fixed.

I wish I could explain how, but after four attempts I didn't get that error, but got "Radio not in DFU mide", so I unplugged the cable, powered down, plugged in, restarted in DFU mode and it loaded.
At the end it did not come up with the screen asking to press enter so I had to reboot the radio.
Now working 100% in Open GD77

VK3KYY
Posts: 8682
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: MD-9600 / RT-90 Installation

Post by VK3KYY » Thu Sep 19, 2024 10:28 am

GM4SVM wrote: ↑
Thu Sep 19, 2024 10:24 am
Apologies its fixed.

I wish I could explain how, but after four attempts I didn't get that error, but got "Radio not in DFU mide", so I unplugged the cable, powered down, plugged in, restarted in DFU mode and it loaded.
At the end it did not come up with the screen asking to press enter so I had to reboot the radio.
Now working 100% in Open GD77
OK.

You must also have reseleted the correct donor file. i.e the CPS makes a checksum of the 'donor' file you select and if it doesn't match the checksum of the correct donor file, then you'll get that message and you won't get DMR operation.


Also. Before you install the OpenGD77 firmware, the Only way to get the MD9600 into DFU mode is to hold the buttons in, and then attach the power cable.

Only after OpenGD77 is installed can you use the Power button and the P1 and Orange buttons to get the radio into DFU mode.