New GD-77/GD-77S/RD-5R/DM-1801 Beta version 2025 02 15.

Locked
User avatar
F1RMB
Posts: 3426
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

New GD-77/GD-77S/RD-5R/DM-1801 Beta version 2025 02 15.

Post by F1RMB » Sat Feb 15, 2025 8:52 am

  • Use double height font in uiCPS and Hotspot screens, if enabled.
  • Adds zero VOX tail value (1ms in fact), needed for some packet radio setups.
  • Add APRS Tx Power setting (defaulted to Master).
    • see "Ch Power" in "APRS options"
  • Fix a GPS problem when entering/leaving the Hotspot mode.
  • As usual, some cleanups.
The firmwares are available at: https://drive.proton.me/urls/516RWWP674#MF8KFntcjIQs
The voice prompts are available at: https://drive.proton.me/urls/H0XNJZFH08#YPSZxRlhHBGG

NOTE: You need to use a CPS version greater or equal the the 2025/01/26. See the CPS section viewforum.php?f=12

For translators, the on-screen texts, voice prompts CSV and CPS XML files are located at: https://drive.proton.me/urls/256SP2W1NM#mC9d2L32MEmb
The voice-prompts and localization files have not changed since the last beta.

IZ2EIB
Posts: 177
Joined: Sat Nov 30, 2019 12:55 pm

Re: New GD-77/GD-77S/RD-5R/DM-1801 Beta version 2025 02 15.

Post by IZ2EIB » Sun Feb 16, 2025 9:09 pm

Hi Daniel,
thank you very much to you and all the people involved in the OpenGD77 project for your tireless magnificent work!
Here are the new italian.h, Italian.xml and wordlist_italian updated to 16/02/2025:
NEW_16022025_italian.h + Italian.xml + wordlist_italian.zip
New italian.h, Italian.xml and wordlist_italian updated to 16/02/2025
(24.28 KiB) Downloaded 187 times
Thank you very much Daniel!

73 best regards de Fabio IZ2EIB.

User avatar
F1RMB
Posts: 3426
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: New GD-77/GD-77S/RD-5R/DM-1801 Beta version 2025 02 15.

Post by F1RMB » Mon Feb 17, 2025 3:45 am

Hi Fabio,

Thanks for the updates (will be part of the next releases).

Cheers.
---
Daniel

S58SMS
Posts: 166
Joined: Mon Dec 20, 2021 8:00 am

Re: New GD-77/GD-77S/RD-5R/DM-1801 Beta version 2025 02 15.

Post by S58SMS » Mon Feb 17, 2025 6:04 pm

Hello. I have a question. If ts filter is off (monitoring both slots), missing start of qso sometimes is normal due to mode or i have something else wrong?

Is it possible on next uodate, to set minimum filter time to one second instead of minimum 2 sec? I would like to decrease slot hold time to minimum - or is this technically impossible? Older fw has option 1sec and workimg fine.

Br

User avatar
F1RMB
Posts: 3426
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: New GD-77/GD-77S/RD-5R/DM-1801 Beta version 2025 02 15.

Post by F1RMB » Tue Feb 18, 2025 5:47 am

You already asked that question, and got the answer:
viewtopic.php?f=18&t=3879&p=30163#p30163

There is still a problem when the firmware remains "silent" sometimes. But yet, I don't know if it's a FW bug or a problem with the HR-C6000. Keep in mind that we only have a partial/incomplete documentation for that chip, so tracking and cirvumventing such problem is painful and takes hours to fix (and here it's a real PITA as it's random).
So stop asking for 1 seconds TS filter time, that won't happen.

Thanks.

User avatar
F1RMB
Posts: 3426
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: New GD-77/GD-77S/RD-5R/DM-1801 Beta version 2025 02 15.

Post by F1RMB » Sun Feb 23, 2025 12:11 pm

This version has been superseded: viewtopic.php?f=13&t=4900

Locked