Anything specifically related to the DM-1801 version of the firmware
-
PU5JNP
- Posts: 8
- Joined: Sun Nov 17, 2024 4:10 am
Post
by PU5JNP » Sun Nov 17, 2024 6:16 am
I'm trying to use the APRS function, but all location values that I set in channel appears wrong in aprs.fi.
In direwolf log, I see this:
Code: Select all
PU5JNP-7 audio level = 28(8/8) [SINGLE] ::::::___
[0.2] PU5JNP-7>APOG77,WIDE1-1,WIDE2-1:!2723.100S/04823.100W[DM-1801
Error: '0' found for latitude hemisphere. Specification requires upper case N or S.
Invalid character in longitude. Found '/' when expecting 0 or 1 for hundreds of degrees.
Position, Staging Area (S0)
W[DM-1801
In aprs.fi my location appears like:
Its a firmware bug?
-
F1RMB
- Posts: 3426
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Sun Nov 17, 2024 6:38 am
PU5JNP wrote: ↑Sun Nov 17, 2024 6:16 am
I'm trying to use the APRS function, but all location values that I set in channel appears wrong in aprs.fi.
In direwolf log, I see this:
Code: Select all
PU5JNP-7 audio level = 28(8/8) [SINGLE] ::::::___
[0.2] PU5JNP-7>APOG77,WIDE1-1,WIDE2-1:!2723.100S/04823.100W[DM-1801
Error: '0' found for latitude hemisphere. Specification requires upper case N or S.
Invalid character in longitude. Found '/' when expecting 0 or 1 for hundreds of degrees.
Position, Staging Area (S0)
W[DM-1801
In aprs.fi my location appears like:
Its a firmware bug?
What are the values you entered ?
Post your codeplug here.
Cheers.
---
Daniel
-
F1RMB
- Posts: 3426
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Sun Nov 17, 2024 6:58 am
BTW, you didn't mentionned the firmware & CPS version you're using.
Your Lat and Lon values are quite wierd, as you can only have two digits decimals (I double checked the latest code, and it's fine).
-
PU5JNP
- Posts: 8
- Joined: Sun Nov 17, 2024 4:10 am
Post
by PU5JNP » Sun Nov 17, 2024 8:11 am
I settled these values:
Lat: 27.3506S
Lon: 48.3511W
CPS: OpenGD77 CPS R2024.10.31.01 - Windows 10
Radio: Baofeng DM-1801
Firmware version: Build 20241018200306 [ 7bf8c45 D]
-
F1RMB
- Posts: 3426
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Sun Nov 17, 2024 8:29 am
PU5JNP wrote: ↑Sun Nov 17, 2024 8:11 am
I settled these values:
Lat: 27.3506S
Lon: 48.3511W
You talked about APRS location. So, did you set a location in the given APRS config (check that in the CPS).
Also, you don't use these coordinates (I checked on APRS.fi).
PU5JNP wrote: ↑Sun Nov 17, 2024 8:11 am
CPS: OpenGD77 CPS R2024.10.31.01 - Windows 10
Radio: Baofeng DM-1801
Firmware version: Build 20241018200306 [ 7bf8c45 D]
I guess you've made a typo about the HT model, right ?
Please, post your codeplug, and tell us which APRS channel you're using (its name).
Cheers.
---
Daniel
-
PU5JNP
- Posts: 8
- Joined: Sun Nov 17, 2024 4:10 am
Post
by PU5JNP » Sun Nov 17, 2024 9:01 am
And now, direwolf says:
Code: Select all
PU5JNP-7 audio level = 18(8/8) [SINGLE] :::::____
[0.2] PU5JNP-7>APOG77,WIDE1-1,WIDE2-1:!/\@EEB8ij[ !DM-1801
Position, Human
S 27 23.9999, W 048 23.9999
DM-1801
-
F1RMB
- Posts: 3426
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Sun Nov 17, 2024 9:32 am
PU5JNP wrote: ↑Sun Nov 17, 2024 9:01 am
And now, direwolf says:
Code: Select all
PU5JNP-7 audio level = 18(8/8) [SINGLE] :::::____
[0.2] PU5JNP-7>APOG77,WIDE1-1,WIDE2-1:!/\@EEB8ij[ !DM-1801
Position, Human
S 27 23.9999, W 048 23.9999
DM-1801
You switched to Compressed location.
-
F1RMB
- Posts: 3426
- Joined: Sat Nov 16, 2019 5:42 am
- Location: Grenoble, France
Post
by F1RMB » Sun Nov 17, 2024 10:05 am
BTW, it's a firmware bug.
I'm fixing it right now.
-
PU5JNP
- Posts: 8
- Joined: Sun Nov 17, 2024 4:10 am
Post
by PU5JNP » Sun Nov 17, 2024 4:53 pm
I tested with not compressed too, it's the same result.
