OpenGD77

I have the digital ID defined as a private IDs for Parrot and my own Radio ID. When I make a call into a hotspot, it shows up as Group 9990 instead of a private call. When I call another radio configured for private ID on the same channel (direct) the radio with OpenGD77 won't open squelch, but the ...

Has anyone tried calling a contact with a PRIVATE rather than GROUP ID using this new firmware.

The GD77 will receive a private call from another radio, but when it transmits I think it's marking it as a GROUP ID.

My guess (without better tracing) is that a buffered voice data packet inside OpenGD77 might be being sent again out of sequence to PiStar at a later (sometimes much later) time. I've seen my local RF transmission resent well after it occurred.

One more lockup: M: 2019-12-12 22:07:56.455 DMR Slot 2, received network end of voice transmission from 2W0JMK to TG 98977, 1.2 seconds, 0% packet loss, BER: 0.0% M: 2019-12-12 22:15:09.310 DMR Slot 2, received RF voice header from KD2LH to TG 98977 M: 2019-12-12 22:19:09.463 DMR Slot 2, RF user has...

Pi-Star just momentarily started dropping voice packets. This is the log: M: 2019-12-12 14:44:52.704 DMR Slot 2, RF user 0 rejected The hotspot is continuing to receive voice packets from the VOIP network, and it continues to transmit through the GD77. This has continued over a number of different u...

Logging started: Live Logs Starting logging, please wait... M: 2019-12-11 20:32:57.468 DMR Slot 2, received RF voice header from KD2LH to 9990 I saw this anomaly in the log: M: 2019-12-11 20:58:34.891 DMR Slot 2, received network end of voice transmission from N4CWZ to TG 3137, 43.3 seconds, 6% pack...

HI, I have this running on a Pi Zero W now. We'll see if the slower computer / usb interface makes a difference.

One more failure log. Communication to MMDVM from PiStar is failing. This locked up within a few minutes of starting a conversation. I: 2019-12-10 19:57:56.391 This software is for use on amateur radio networks only, I: 2019-12-10 19:57:56.391 it is to be used for educational purposes only. Its use ...

Here's the PiStar desktop and log from today's test. The failure occurred within about 15 minutes of leaving the device and GD77 idle (no local RF). The last thing logged by Pi-Star was a "Write Error": E: 2019-12-10 18:10:01.407 Error returned from write(), errno=5 Here's the desktop appearance and...

Could this problem relate to mode switch issues between DMR operation and when PiStar MMDVM Host triggers morse ID periodically?

With the right tracing software / hardware I'd be happy to try and trace this. Recommendations? I also just received the PiZero to use with this project.