OpenGD77

Thank you. I wanted to drop the power down a bit, but instead of dropping the setting to 3800, I changed the power setting to 4 watts GARY The setting you described is only for the Custom power setting. It allows you to set the PA drive from no drive at all to the maximum the hardware is capable of...

In the settings, there’s a power setting. It’s default set at 4100 which is max. Goes down in 100 increments. How much drop in power is every drop of 100? GARY. N4KVE These values (100), are the raw DAC values that control the PA drive circuit, the amount of power difference for each step depends o...

This is RF pickup into the external mic cable.

If you want to use this external mic, you should try perhaps adding a ferrite core at the plug end.

oh1cym wrote: ↑

Sat Mar 22, 2025 10:54 pm

trying to upload the file but there is a problem it is not showing the document or file to upload.
seems to be stuck on another model.

You have not downloaded the 'Donor' file.

Read the installation instructions, which includes links

well, something is causing OpenGD77 to not correctly take the high power values ​​from the original calibration and transfer them to the 5W calibration in OpenGD77 (especially at 460Mhz, 470Mhz, and 480Mhz as in the images above). The strange problem I noticed, is Not the same as your problem. My p...

I experienced a similar problem with my dm-1701 where I could not activate an FM repeater when using 5w, but could active using lower lower levels. However the problem was not repeatable, i.e when I checked the power output using a power metre it was correct, and I was also able to activate the repe...

This isn't a problem which would be resolved even if an Admit Criteria function could be added Specifically if such a feature could be added, It would definately be off by default, because most of the existing user base would be annoyed if the current functionality was changed. Hence you would need ...

I wish there was a way to either backup the settings via cps, or perhaps display the non-default ones somehow so we can preserve before flashing. @SP9RZF idk, that's my default screen for SK1. maybe u'r firmware is too old.. No. There is no functionality to specifically backup the settings data. Th...

N4KVE wrote: ↑

Sat Mar 15, 2025 4:56 pm

For the benefit of the 520 people who read my OP, but didn’t know the answer, the OpenGD77 CPS runs perfectly on a Windows 7 32 bit machine. GARY.

Ok. Thanks for sharing

EB1HDI wrote: ↑

Fri Mar 14, 2025 9:18 pm

Hola buenas ahora que tenemos el baofeng 1701 con pantalla a color no es posible enviar un logo a color

Please post in English