OpenGD77

Hi !
The new revisions have a different display. And it has a backlight half as low as on the old revisions. There's no way to fix it.

Someone else now has the UV380 Plus and some high quality test equipment and they will send me the necessary data Hi ! I noticed a very interesting fact. I calibrated the VHF range, then started calibrating the UHF range. Today I changed the front panel to the old (bright) one + GPS, went into cali...

VK3KYY wrote: ↑

Mon Feb 26, 2024 7:10 am

OK.

Someone else now has the UV380 Plus and some high quality test equipment and they will send me the necessary data

VHF Calibrate

BTW. What were the original values before you changed them ? If you didn't do the "Factory Reset" in the OpenGD77 calibration screen, the power values should be the values from before you changed the official firmware Hi ! I couldn't set it up on the official firmware - Low -1W, medium - 2.5W, High...

Hi. I tried to calibrate on the native firmware, and nothing worked for me. I set the minimum level of 1W for all frequencies, and the value turned out to be 40-43. I saved it, recorded it in the station, read it from the station - everything is fine. I enter the calibration mode - and at a value of...

BTW. To reload the official Codeplug, you need to modify the setting.ini file for the official CPS and change the line that reads password=0 to password=password Today I will send a table with the calibrations that turned out to be on the TYT 390 Plus 10W. But only you can add items 6-7-8-9-10W to ...

Calibrate TYT 390 Plus 10W Thanks Hi! If I connect a power meter to the Unified State Exam 390 Plus 10W, and through calibration mode (in the OpenGD77 firmware) I change the data so that they correspond to what is written ( 50 - 250 - 500 -750 - 1 -2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 ). Will this he...

Calibrate TYT 390 Plus 10W
https://mega.nz/folder/V6pUiYoC#Qfzuwed9Tj3koVwoQYvX2g

Measurements were made by Nissei DG-503 OK. Thanks. It looks like they simply use the High power calibration value as 10W, However I don't understand why the Low power setting in the calibration does not produce 1W Do you know what power the radio produces on the Low setting when using the official...

Measurements were made by Nissei DG-503