OpenGD77

It took me a few days recently to get a handle on upgrading the firmware and programming everything, but I think I have it finally figured out.

Good luck, work slow, and try not to get as frustrated as I was lol.

Ok I understand about the rf, ever considered it. I'll try to get a good old fashioned qso. Regarding DMR this is my local repeater, does this mean it's offline? https://brandmeister.network/?page=repeater&id=311381 Offline from Brandmeister since Mon Sep 09 2024 23:02:00 GMT. Well that is the prob...

Ok I understand about the rf, ever considered it. I'll try to get a good old fashioned qso.

Regarding DMR this is my local repeater, does this mean it's offline?

https://brandmeister.network/?page=repeater&id=311381

Still nothing. Can open the repeater (with the 390) that is online via repeaterbook, no voice transmitted or heard on radio A. When I use radio A and tx to the repeater I can hear it open on the 390, but no voice from radio A is heard. Simplex radio A to uv390 back and forth can tx and rx voice on ...

Still nothing. Can open the repeater (with the 390) that is online via repeaterbook, no voice transmitted or heard on radio A. When I use radio A and tx to the repeater I can hear it open on the 390, but no voice from radio A is heard. Simplex radio A to uv390 back and forth can tx and rx voice on t...

Most repeaters require that you transmit a CTCSS tone. However not all repeaters which require a tone to access them, also transmit a tone themselves Unless the repeater is multimode, e.g. FM and DStar etc, there is generally no need to use a Rx tone in your codeplug. Yea, I thought I needed the fr...

You have three channels, 2 of them (both Duplex) have a CTCSS TX tone set. Ok so this is a dumb question. In the "analog" section on the CPS under Bandwidth, instead of using the uplink tone from Repeater Book, I just leave both Rx Tone and Tx Tone blank instead of using the uplink tone noted on th...

Here you go.

F1RMB wrote: ↑

Tue Oct 01, 2024 1:46 pm

It's SK1 + Green


Cheers.
---
Daniel

I realized that after I kept switching between day/night and tried green instead lol. I also turned the "filter" setting in the menu from from "ctcss/dcs" to none.

So I spent off and on all day yesterday getting my uv390 gps running. I think I successfully got the firmware going. I watched some videos and made a basic codeplug, and couldn't get anything to work. So then I made a new codeplug, with only one analog station (a working repeater near my house), I p...