Search found 919 matches

by G4EML
Fri Jan 19, 2024 11:26 pm
Forum: CPS
Topic: Channel CSV construction and import struggles
Replies: 8
Views: 1210

Re: Channel CSV construction and import struggles

Two Problems,

You have used NONE instead of None in many lines. The Input Parser is fussy! Use notepad++ to change all NONE to None.

The last Line for WX7 has no channel number (248) at the beginning and no CR LF at the end.

Having corrected these the file loads OK.

Colin G4EML
by G4EML
Fri Jan 19, 2024 9:55 am
Forum: Other unsupported radios
Topic: TYT MD-380 / RT-3 - Not supported [FM only sources]
Replies: 4
Views: 4519

Re: TYT MD-380 / RT-3 - Not supported [FM only sources]

No, openGD77 is not supported in the MD380 / RT3 single band radios. The hardware is different.
by G4EML
Fri Jan 19, 2024 1:17 am
Forum: TYT MD-9600 / Retevis RT-90
Topic: [User error] Master Power not working in channel
Replies: 17
Views: 1382

Re: [User error] Master Power not working in channel

I think you are refering to the fact that the original firmware appeared to support two frequencies or channels at the same time. In fact the radio only has one receiver so it was always scanning between the two. OpenGD77 does not support this. Only one channel or VFO frequency can be selected at a ...
by G4EML
Tue Jan 16, 2024 11:21 pm
Forum: CPS
Topic: Channel CSV construction and import struggles
Replies: 8
Views: 1210

Re: Channel CSV construction and import struggles

I have just cut and pasted the lines from your post into my channels.csv. Both 99 and 103 imported correctly without errors, so I don't think your problem relates to quotes or tabs. As Roger says, the CSV import has quite a bit of error checking but it is impossible to predict every possible situati...
by G4EML
Tue Jan 16, 2024 10:54 pm
Forum: CPS
Topic: Channel CSV construction and import struggles
Replies: 8
Views: 1210

Re: Channel CSV construction and import struggles

The tab character is used to force a spreadsheet program to treat the value as text and not a number. It was intended to prevent channel names (which can contain numbers but are really text) being interpreted as numbers and loosing digits. It is not really needed on frequencies . If a tab is present...
by G4EML
Wed Jan 10, 2024 6:02 pm
Forum: CPS
Topic: "Official firmware can be reloaded into the radio"??
Replies: 6
Views: 1253

Re: "Official firmware can be reloaded into the radio"??

It is often possible to restore the factory firmware without using a backup, so it is worth trying if you need to do it. I have done it many times during development. However strange things can sometimes happen, such as missing icons or password locking. Password locking is easily overcome but missi...
by G4EML
Mon Jan 08, 2024 11:13 am
Forum: Bug reports
Topic: RT3S freezes when use SK2 + SELECT
Replies: 16
Views: 1225

Re: RT3S freezes when use SK2 + SELECT

I think he is refering to SK2 + Rotary. That changes zone directly.
I have just tried it and it works fine here. So it sounds like a codeplug problem.
The special 'All channels' zone is the last to be selected so it could be there is a bad channel causing this.

Colin.
by G4EML
Thu Jan 04, 2024 11:56 pm
Forum: TYT MD-UV380/390 / UV380/390 Plus 10W / Retevis RT-3S / Baofeng DM-1701 / DM-1701B / Retevis RT-84
Topic: Is thier a way to scan the TG list that is on a channel?
Replies: 6
Views: 1009

Re: Is thier a way to scan the TG list that is on a channel?

With OpenGD77 firmware you do not need to scan talkgroups.
With 'DMR Filter' set to 'Off' (the default setting) you radio will already be receiving all talkgroups. This is known as Promiscuous mode on some other radios.
by G4EML
Wed Jan 03, 2024 10:30 pm
Forum: TYT MD-UV380/390 / UV380/390 Plus 10W / Retevis RT-3S / Baofeng DM-1701 / DM-1701B / Retevis RT-84
Topic: Is thier a way to scan the TG list that is on a channel?
Replies: 6
Views: 1009

Re: Is thier a way to scan the TG list that is on a channel?

As Roger says, your question doesn't appear to make sense. Which talkgroup you hear is determined by the 'DMR Filter' setting. By default this is 'Off' which means you will hear any, and all, talkgroups on the frequency. You can optionally restrict reception to only the selected talkgroup by setting...
by G4EML
Tue Jan 02, 2024 1:37 am
Forum: TYT MD-UV380/390 / UV380/390 Plus 10W / Retevis RT-3S / Baofeng DM-1701 / DM-1701B / Retevis RT-84
Topic: Need help with Retevis RT3S
Replies: 17
Views: 8218

Re: Need help with Retevis RT3S

It could be the microphone socket has failed when you plugged in the programming cable to do the update and the internal microphone is no longer connected.
If you have an external speaker / microphone then try that.