OpenGD77

Thanks.

Made some progress updating the official firmware on my GD73.
I still need to install the official CPS for this radio but it wanted to terminate Skype before it would install, which seems very strange, so I'll put the CPS on another less important PC

Early versions of the MD9600 have known hardware fault on DMR, where it only works at 40W

Long press # on VFO is sweep scan
Long press # on Channel screen is now reverse repeater mode

W8LDO wrote: ↑

Mon Aug 08, 2022 1:52 am

Thank you. I tried to do it on my own. Couldn't figure out how.

No worries

Users can't change their own username. I had to log in as admin to do it.

No

That radio is not supported

It appears the new update has fixed this issue. It is scanning great now. Good work guys, and thank you W8LDO Well maybe not. It just did it again on the version 2 md-9600 I have found the DMR filter is the best way for scanning. I am using the talk group of the dmr filter and it seems to be doing ...

OK.

Thanks.


We will wait until there are more comments and some agreement on the Italian file before we include the update into the CPS

It is necessary for the CPS to reboot the radio after writing the firmware, so that all the data is reloaded into the RAM and variables etc

AFIK all radios reboot after the codeplug is written

This sort of problem happens on the GD77 if RF enters the USB cable. Do you have chokes on the cable Nope but I'll try that , I can run it some time on a dummy load too. But it seems that the problem appeared some time after the last transmit, I had it connected to TG91 for several hours earlier wi...

Also. Daniel sent me updated installation instructions containing the italian text

static/firmware_installation.php?lang=Italiano