OpenGD77

I think he refers to the fact that the audio converter or amplifier after finishing any transmission is a few seconds with a soft noise and then it is total silence.

are the same frequency in rx and tx? if they are different I think the red led flashes

With different frequencies of Rx and TX the red led flashes but when a dmr signal enters it lets transmit.


youtu.be/zguZWiaudO0

edit I already found the error, it was mine I had TOT activated and I did not know where the option was .. thanks .. great work what you are doing for this team

Hello, I am testing the D20200507 version and I have fixed the time of 15 seconds to speak when pressing ptt, if I modify the timeout beep N / A, the 15 second limit will continue. The Spanish idioms is wrong since the voice indicates to go to the screen section. * sorry this post does not go here ....

Riku had been informed of the error for some time but it seems that not everyone is affected

and where is the failure in ctss activation? what was the fix or modification in the firmware? Does the pre-release ( D20200507)fix it? look video above you see it breaking up when using 2x gd77 witch rx ctcss. the fix is there look few messages back code is there. LINK https://www.opengd77.com/vie...

curiously if it works and charges faster than with the original PCB but same power source, so I intuit that the original PCB limits amps

I am going to try recording from my radio, I have the intuition that it has the same problem with a very strong signal and with active sub tone sometimes it breaks.

I put the new tp15100 module with the original 500mAh charger of the radioddity DG-77 and my surprise charges in only 3 hours, before with the original cpb it took 6 hours + - . From which I deduce that that original PCB or board absorbed part of the energy or limited it.

and where is the failure in ctss activation? what was the fix or modification in the firmware? Does the pre-release ( D20200507)fix it?