OpenGD77

F1RMB wrote: ↑

Mon Jun 26, 2023 5:14 pm

Hi Toni,

The settings reset is SK2 + Power on, like on every supported radio.
Could you fix this, then I will update the user manual picture ?

Cheers.
---
Daniel

Hello, greetings.
Already fixed SK2 + ON = Firmware Reset settings

73s
EA3V
Toni

Hello everyone. Thanks to Daniel F1RMB, for updating a CheatSheet for TYT and Retevis. This image is extracted from the official manual. https://github.com/LibreDMR/OpenGD77_UserGuide/blob/master/OpenGD77_User_Guide.md EA3V Toni Hello, I have added to the image in the first message several new thin...

frequencies color code time slot all agree and where is that with alkaround/workalone/etc in my cps there is nothing to watch, not even on the rt3s with the gd77 firmware Here is the solution to all your problems, the manual on how OpenGD77 works. https://github.com/LibreDMR/OpenGD77_UserGuide/blob...

In MMDVM, Ok now I see it, only a maximum of 2 digits are contemplated, maximum 99 not 100.
100 = ignored
In MMDVM everything is working ok
Thank you very much for replying to my post.

73s EA3V
Toni

Hello everyone. What you say I have already tried and it does not work for me. I have already mentioned above that I have tested in MMDVM and in BLUEDV. In MMDVM.ini RFLevel=100 And it keeps getting only 50mw. Before activating the hotspot mode I put the 2 VFO 5W on If it only happens to me, later I...

Greetings to all. Looking in the forum and the manual I can't find a way to adjust power in Hotspot mode on my TYT DM uv-390 GPS It is always at 50 mw. It happens to me in MMDVM and in BLUEDV. In MMDVM, no matter how much the power parameter changes, it always outputs 50 mw. Is the power locked in t...

Greetings to all. Trying to go back to original firmware TyT MD UV-390. the walky stays blocked, does not respond to the VFO switching and shows a different frequency on the screen than the one programmed in the CPS. The walkye remains semi-blocked... I don't know if I touched a button I shouldn't h...

Hi, Thanks, it will be added to the user manual. Note: I fixed the boot mode line, as it was wrong and misleading (going to boot loader mode doesn't reset the settings, and the correct key sequence is SK1 + PTT (S1 + PTT on your cheatsheet). Cheers. --- Daniel @ EA3V - Thanks for your work @ F1RMB,...

Thank you very much for your great work

Hello everyone. Thanks to Daniel F1RMB, for updating a CheatSheet for TYT and Retevis. This image is extracted from the official manual. https://github.com/LibreDMR/OpenGD77_UserGuide/blob/master/OpenGD77_User_Guide.md New update Sat Aug 26, 2023 FM, FM mode slection FM / FMN and DMR, Slot selection...