I set 163.99625 mhz, but CPS sets auto to 163.99750 mhz
Re: I set 163.99625 mhz, but CPS sets auto to 163.99750 mhz
As we have said before the firmware is only licenced for amateur radio use.
If you load it into your radio you do so at your own risk. Doing so will invalidate any type approvals or certification.
If you load it into your radio you do so at your own risk. Doing so will invalidate any type approvals or certification.
Re: I set 163.99625 mhz, but CPS sets auto to 163.99750 mhz
Hi, I do not want to create a separate topic. I have a similar problem, when I try to set VFO for 145,450 in CPS (E2022.10.22.01), it automatically changes the frequency to 145,44999.
Re: I set 163.99625 mhz, but CPS sets auto to 163.99750 mhz
Try the latest version 2022 10 25
Some fixes did not seem to be in the 2022 10 22 version
Some fixes did not seem to be in the 2022 10 22 version
Re: I set 163.99625 mhz, but CPS sets auto to 163.99750 mhz
Works fine for me. Someone else will need to confirm if there is still a problem when entering
145.44999
Re: I set 163.99625 mhz, but CPS sets auto to 163.99750 mhz
Roger, it fails for me, but only when entering the VFO frequencies. Frequencies on the Channels work OK so there must be some difference in the code.
Entering 145.450 gives 145.44999.
In practice a 10Hz error is not going to have any noticeable effect.
Colin.
Entering 145.450 gives 145.44999.
In practice a 10Hz error is not going to have any noticeable effect.
Colin.
Re: I set 163.99625 mhz, but CPS sets auto to 163.99750 mhz
Somehow not all the fixes were applied to the 2022 10 22 version installer exe
So I rebuilt the Release version exe and build a new installer from that version
Are you using the 2022 10 22 or 2022 10 25
The later version works OK for me
Re: I set 163.99625 mhz, but CPS sets auto to 163.99750 mhz
Hi,
I can confirm the "rounding" problem using the 2022.10.25.01 version.
There is no problem using the 2022.09.20.01.
Cheers.
---
Daniel
I can confirm the "rounding" problem using the 2022.10.25.01 version.
There is no problem using the 2022.09.20.01.
Cheers.
---
Daniel
Re: I set 163.99625 mhz, but CPS sets auto to 163.99750 mhz
Thanks Daniel
Thats very strange.
Its working fine for me, and seems to be OK for one other user
(https://opengd77.com/viewtopic.php?f=10&t=2445#p20371)
I'm surprised the older version was not rounding, as the official CPS code had a function to check whether the frequency which was entered was a multiple of 25kHz or 6.25kHz etc and would round to the nearest step