[Fixed - calibration data error] Transmitting on VHF DMR Repeater not possible
Re: Transmitting on VHF DMR Repeater not possible
OK.
So are you saying that you can't wake the repeater if its not transmitting ?
If someone else transmits on TS2 can you reply to them on TS2
If someone else transmits on TS1 can you reply to them on TS1
Does another QSO need to continue on the other TS for you to have a QSO ? e.g. if the other QSO ends, does the repeater still receive your signal and continue to work ?
So are you saying that you can't wake the repeater if its not transmitting ?
If someone else transmits on TS2 can you reply to them on TS2
If someone else transmits on TS1 can you reply to them on TS1
Does another QSO need to continue on the other TS for you to have a QSO ? e.g. if the other QSO ends, does the repeater still receive your signal and continue to work ?
Re: Transmitting on VHF DMR Repeater not possible
So are you saying that you can't wake the repeater if its not transmitting ? *YES*
If someone else transmits on TS2 can you reply to them on TS2 *NO*
If someone else transmits on TS1 can you reply to them on TS1 *NO*
Does another QSO need to continue on the other TS for you to have a QSO ? e.g. if the other QSO ends, does the repeater still receive your signal and continue to work ? *NO*
* The repeater only receives my signal if it is transmitting
* Thx. Juan
If someone else transmits on TS2 can you reply to them on TS2 *NO*
If someone else transmits on TS1 can you reply to them on TS1 *NO*
Does another QSO need to continue on the other TS for you to have a QSO ? e.g. if the other QSO ends, does the repeater still receive your signal and continue to work ? *NO*
* The repeater only receives my signal if it is transmitting
* Thx. Juan
Re: Transmitting on VHF DMR Repeater not possible
1. I check the brandmeister dashboard and I see my callsign
2. When I release the PTT, the repeater is finishing transmitting and I see my callsign on the screen of my walkie
Thx
2. When I release the PTT, the repeater is finishing transmitting and I see my callsign on the screen of my walkie
Thx
Re: Transmitting on VHF DMR Repeater not possible
OK.
So the repeater is hearing your signal.
What it sounds like is that the repeater does not wake up when you transmit.
So either the repeater is not waking up or the OpenGD77 does not hear the response from the repeater and then go into full Tx mode.
Re: Transmitting on VHF DMR Repeater not possible
by VK3KYY »
...
So either the repeater is not waking up or the OpenGD77 does not hear the response from the repeater and then go into full Tx mode.
If I turn on an analog receiver and and I tune it on the dmr repeater output, I do not receive a dmr signal while I transmit on the repeater input with my gd77,
yes, I think GD77 don't go into full Tx mode.
Thx
Re: Transmitting on VHF DMR Repeater not possible
The repeater is not waking up.
BTW. Which version firmware are you using ?
BTW. Which version firmware are you using ?
Re: Transmitting on VHF DMR Repeater not possible
Update 29th Jan
Re: [Fixed - calibration data error] Transmitting on VHF DMR Repeater not possible
Hi and thanks for your great work.
I read * Fix to DMR repeater wake-up, regarding the trxIsTransmitting flag" in today release and thought i could resolve this issue.
I have loaded 7-Nov Release but I still do not "wake up the repeater".
Repeater: ED7ZAL (UHF, Hardware MMDVM (Repeater). Firmware 20170501)).
73
I read * Fix to DMR repeater wake-up, regarding the trxIsTransmitting flag" in today release and thought i could resolve this issue.
I have loaded 7-Nov Release but I still do not "wake up the repeater".
Repeater: ED7ZAL (UHF, Hardware MMDVM (Repeater). Firmware 20170501)).
73
Re: [Fixed - calibration data error] Transmitting on VHF DMR Repeater not possible
OK.EC7AJT wrote: ↑Sat Nov 07, 2020 10:34 amHi and thanks for your great work.
I read * Fix to DMR repeater wake-up, regarding the trxIsTransmitting flag" in today release and thought i could resolve this issue.
I have loaded 7-Nov Release but I still do not "wake up the repeater".
Repeater: ED7ZAL (UHF, Hardware MMDVM (Repeater). Firmware 20170501)).
73
I have removed this version because Daniel found hotspot mode has some problems.
Is your hotspot duplex ??
Simplex hotspots don't use wakeup.