A bug in "dual" channel handling
Posted: Sat Jul 25, 2020 7:18 am
Hello there,
it seems that there is a bug in the "dual" (DMR/FM) channel handling.
To reproduce, follow these steps:
1) Stay on a digital channel. Remember its CC and TS.
2) Move to a "dual" channel which is in analog mode by default. Use a channel with different CC and TS settings in the digital mode than the previous channel.
3) Using Function and * switch to the digital mode.
You'll see the CC and TS of the previous digital channel, not the new one.
4) Transmit. You can monitor that these wrong values are used for transmitting.
5) Unkey.
Now, you'll see the proper values.
6) Transmit again. The proper values are now used.
With regards / 73,
OK1PT Pavel
it seems that there is a bug in the "dual" (DMR/FM) channel handling.
To reproduce, follow these steps:
1) Stay on a digital channel. Remember its CC and TS.
2) Move to a "dual" channel which is in analog mode by default. Use a channel with different CC and TS settings in the digital mode than the previous channel.
3) Using Function and * switch to the digital mode.
You'll see the CC and TS of the previous digital channel, not the new one.
4) Transmit. You can monitor that these wrong values are used for transmitting.
5) Unkey.
Now, you'll see the proper values.
6) Transmit again. The proper values are now used.
With regards / 73,
OK1PT Pavel