Amateur radio firmware for the GD-77, GD-77S, DM-1801, DM-1801A, RD-5R, MD-9600/RT-90, MD-UV380/RT-3S, DM-1701/RT-84 and MD2017/RT-82 radios
https://www.opengd77.com/
What is your callsign ?Renco wrote: ↑Sat Sep 19, 2020 9:32 amI have the same bug on DM-1801.
So what I've found...
If the radio is in silent mode and when I transmit, right after transmitting radio beeps and squelch becomes disabled. Switching radio off and on helps to enable squelch again.
If I set radio in beep mode (and set it to -24 dB to get pseudosilent), squelch is OK.
I've noticed it since not working silent mode bug was fixed in August.
Please give full details of your channel setup.Renco wrote: ↑Sat Sep 19, 2020 9:32 amI have the same bug on DM-1801.
So what I've found...
If the radio is in silent mode and when I transmit, right after transmitting radio beeps and squelch becomes disabled. Switching radio off and on helps to enable squelch again.
If I set radio in beep mode (and set it to -24 dB to get pseudosilent), squelch is OK.
I've noticed it since not working silent mode bug was fixed in August.
Here is my channel setup detailsVK3KYY wrote: ↑Sat Sep 19, 2020 10:14 pmPlease give full details of your channel setup.Renco wrote: ↑Sat Sep 19, 2020 9:32 amI have the same bug on DM-1801.
So what I've found...
If the radio is in silent mode and when I transmit, right after transmitting radio beeps and squelch becomes disabled. Switching radio off and on helps to enable squelch again.
If I set radio in beep mode (and set it to -24 dB to get pseudosilent), squelch is OK.
I've noticed it since not working silent mode bug was fixed in August.
FM. Wide or Narrow
CTCSS or DCS settings
Any other settings on the radio which are not the default settings
Basically, I can't replicate your bug, given the limited information you posted.
FM works fine, Sound set to silent. squelch opens and closes as it should.
However I have not enabled CTCSS or DCS, which you may have enabled.