[Fixed] RD-5R Digital Contact list feature "TG 9"

[KI5GZK]

Hi,

Can you share your codeplug, I would like to make some tests.


Cheers
---
Daniel

I have a test codeplug I can send you. How do I do that?

[F1RMB]

Hi,

Post it here.


Cheers.
---
Daniel

[KI5GZK]

BTW, are you running the latest development firmware version ?


Cheers
---
Daniel

I am always running the latest development firmware.
Currently dated 10/14/2020.
I have flashed my GD-77 so much that the rubber SP/MIC cover is cracking!

[KI5GZK]

I am being told that my 128KB codeplug is too large.

[F1RMB]

I am being told that my 128KB codeplug is too large.

Zip it.

Cheers.
---
Daniel

[KI5GZK]

I am being told that my 128KB codeplug is too large.

Zip it.

Cheers.
---
Daniel

Now why didn't I think of that! Here you go!

[F1RMB]

Thanks, I will test it right away.

Cheers.
---
Daniel

[KI5GZK]

Thank you for looking into this. Much appreciated!

[KI5GZK]

If something is not defined e.g. a Contact, or no TG list is defined for a channel the firmware inserts TG9 as it is necessary to have a Contact, and also a TG list.

In your case something is set to "None" for that Channel and this is not allowed.

I should change the CPS so it does not allow Channels with without a TG list and without a Contact

I was never very clear on the reason to have a contact selected for a channel when you are using a TG list.
Could you please explain the purpose of the contact setting?

Thank you.

[F1RMB]

Okay,

So, one zone is empty, which is bad, just add one of your channel in it.

But there is still a bug in the FW, as the TG 9 shouldn't be displayed (the one stuck at the bottom list).
I found and fixed the bug.


Cheers.
---
Daniel