Page 1 of 1

When switching channel, TS in error does not change

Posted: Thu Sep 10, 2020 5:20 pm
by sm0yxi
When switching channel, TS in error does not change on-screen, if both channels have a "TG list" with only one TG in it.

In my code plug, the two channels (in zone UHF) are called "test one tg 1" and "test one tg 2".
Those two channels do use different TS in the channel settings.

The TG list used in both channels contains the TG "Sw d4", which has not a TS property attached to it.

The field "Contact" in both channels have TG = "4800 2", which DO have a TS property attached to it (TS = 2).

But I thought that the field "Contact" is not used in OpenGD77, at least not when you do have a TG list connected to the channel ?

(It seems that I can not enclose my code plug file, error message = "Too large". If you have a use for my code plug file, send email to
"rhlind@gmail.com").