Page 1 of 1

Latest developement release (2020.10.27) VFO issue

Posted: Thu Oct 29, 2020 2:33 am
by KI5GZK
The VFO in DMR mode is not working correctly when configured with TG List set to "None", but does have a Contact selected.

Here is an example:

Channel 1 is configured with TG List = BrandMeister
Channel 2 is configured with TG List = TGIF
The VFO is initially working as expected.
If I switch to channel 1 and then switch to VFO, the VFO is now using the BrandMeister TG List.
If I switch to channel 2 and then switch to VFO, the VFO is now using the TGIF TG List.

Re: Latest developement release (2020.10.27) VFO issue

Posted: Thu Oct 29, 2020 5:21 am
by VK3KYY
KI5GZK wrote:
Thu Oct 29, 2020 2:33 am
The VFO in DMR mode is not working correctly when configured with TG List set to "None", but does have a Contact selected.

Here is an example:

Channel 1 is configured with TG List = BrandMeister
Channel 2 is configured with TG List = TGIF
The VFO is initially working as expected.
If I switch to channel 1 and then switch to VFO, the VFO is now using the BrandMeister TG List.
If I switch to channel 2 and then switch to VFO, the VFO is now using the TGIF TG List.
OK.

I'll add it to the bug list on Github

https://github.com/rogerclarkmelbourne/ ... issues/838

Re: Latest developement release (2020.10.27) VFO issue

Posted: Thu Oct 29, 2020 5:37 pm
by KI5GZK
I have tested the 2020.10.29 development release and have confirmed that this issue has been fixed.

Thank you!

Re: Latest developement release (2020.10.27) VFO issue

Posted: Thu Oct 29, 2020 7:31 pm
by VK3KYY
OK.