[Fixed - calibration data error] Transmitting on VHF DMR Repeater not possible

EC7AJT
Posts: 29
Joined: Mon Jan 13, 2020 8:02 pm

Re: [Fixed - calibration data error] Transmitting on VHF DMR Repeater not possible

Post by EC7AJT » Sat Nov 07, 2020 1:57 pm

No, no, this issue is old and I don't use hotspot.

With OpenGD77, I have never been able to wake this repeater if its not transmitting (other slot)

This only happens to me with this repeater: ED7ZAL (UHF, Hardware MMDVM (Repeater). Firmware 20170501)).

We treat it on Febrery on this topic (page 7):
I tried to change the calibration:

Reference oscillator tuning uhf (original) 998--->995, 990, 985, 1005 but unsuccessfully.

I can't connect with this dmr repeaters, ED7ZAL (UHF, Hardware MMDVM (Repeater). Firmware 20170501)

* with official firmware, no problem.
* When one slot is busy, I connect fine for the other slot
* a colleague has 5 different dmr walkie and connects fine with this repeater
* with other repeaters, simplex or by hotspot, I have no problem
Thx

VK3KYY
Posts: 3318
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: [Fixed - calibration data error] Transmitting on VHF DMR Repeater not possible

Post by VK3KYY » Sat Nov 07, 2020 8:01 pm

OK.

Post Reply