TG and ID issue with Repeater
Re: TG and ID issue with Repeater
Sorry for the late Chime in, but I've been seeing the same behavior on my radio. This is by no means a complaint as I think what you and your collaborators are doing with the GD77 is absolutely amazing. Just more of an FYI that Mike is not alone.
Regards,
Carlos
KC4FER
Regards,
Carlos
KC4FER
Re: TG and ID issue with Repeater
Ok.KC4FER wrote: ↑Sat Dec 07, 2019 8:55 pmSorry for the late Chime in, but I've been seeing the same behavior on my radio. This is by no means a complaint as I think what you and your collaborators are doing with the GD77 is absolutely amazing. Just more of an FYI that Mike is not alone.
Regards,
Carlos
KC4FER
I will need t write a debug version which prints what data the DMR chip sends, via USB serial
Re: TG and ID issue with Repeater
SQ7SPE also has reported the same issue. I think because it only happens under certain conditions it is hard to track down but I have been really work hard to eliminate possibilites however so far have not found any external (to the firmware) causes.
Re: TG and ID issue with Repeater
Guys.
I've found and fixed one bug with the TG display, but I think its necessarily going to fix things for you.
Try this version
I've found and fixed one bug with the TG display, but I think its necessarily going to fix things for you.
Try this version
- Attachments
-
[The extension sgl has been deactivated and can no longer be displayed.]
Re: TG and ID issue with Repeater
On first test it did not correct the problem but I will keep test to see if anything changes
sorry
sorry
Re: TG and ID issue with Repeater
Maybe like you said a debugging software could help
Re: TG and ID issue with Repeater
It is possible output debug messages via USB, but of course when you plugin the USB cable you loose all audio etc
John G4TSN made a splitter cable from a USB cable and 2 audio splitter cables (a 2.5mm and 3.5mm splitter), so that he can use USB at the same time as operate the radio.
When I get time I intended to make something like that, possibly even by just buying some 2.5mm and 3.5mm stereo extension cables and cutting off the socket end, and soldering the wires etc
John G4TSN made a splitter cable from a USB cable and 2 audio splitter cables (a 2.5mm and 3.5mm splitter), so that he can use USB at the same time as operate the radio.
When I get time I intended to make something like that, possibly even by just buying some 2.5mm and 3.5mm stereo extension cables and cutting off the socket end, and soldering the wires etc
Re: TG and ID issue with Repeater
That sounds like a good idea, wonder if he has pinout of that
I guess you could also just use two radios on at the same time to listen to one and have the debugger running on the other?
I guess you could also just use two radios on at the same time to listen to one and have the debugger running on the other?
Re: TG and ID issue with Repeater
I'll try to dig out the pinout.