Hello Daniel!
Greetings to everyone!
In answer to your previous question first, the applied CPS D2021.06.10.01
Based on your writing, I already think I understand what’s going on.
It's probably what you described
As a user, I thought differently with my head.
I basically use simplex radio. Groups, overlapping, or independent sets.
I was suspicious of TG 9. I put him in a group because I read that he was a general caller.
But not all TG lists include TG 9. Hmm .. And there’s no top of the list either. Thus, the appearance of TG 9 is interesting for VFO / MR switching. If it weren't on the DC list, would it still show up?
---- Digital connections ----
Number name Caller ID type
1 PAP 12300001 private call ----------------(Radio 1 PAP father)
2 MAM 12300002 private call ---------------(Radio 2. MAM mother)
3 BAR 12300003 private call ----------------(Radio 3. BAR my son's name is abbreviated)
4 MIR 12300004 private call ----------------(Radio 4: MIR my daughter's name)
5 MAR 12300005 private call ---------------(Radio 5. MAR little son's name)
6 RADIO_6 12300006 private call ----------(Radio 6. RADIO_6 guest radio)
7 TG_PAPMAM 12312000 Group calling --------(this is how the group names give themselves)
8 TG_GYEREK 12300345 Group call ------------(GYEREK children)
9 TG_CSAL 12312345 Group call ---------------(CSAL FAMILY)
10 TG_MAMBAR 12302300 Group call ----------(this is how the names of the groups give themselves MAM + BAR)
11 TG_PAPBAR 12310300 Group dialing
12 TG_MAMMIR 12302040 Group call
13 TG_PAPMIR 12310040 Group call
14 TG_PAPMAR 12310005 Group call
15 TG_MAMMAR 12302005 Group call
16 TG_BARMIR 12300340 Group call
17 TG_BARMAR 12300305 Group call
18 TG_MIRMAR 12300045 Group call
19 TG_FELNOTT 12312006 Group call --------- (adult)
20 TG 9 .................9 Group call
------------------------------------------------- ----------
----- TG Lits ---- (But every list is on all radios)
TGL_PAP (Radio 1 base set list)
--TG_PAPMAM
--TG_CSAL
--TG_GYEREK
--TG_PAPBAR
--TG_PAPMIR
--TG_PAPMAR
--TG_FELNOTT
--TG 9
TGL_MAM (Radio 2 base set list)
--TG_PAPMAM
--TG_CSAL
--TG_GYEREK
--TG_MAMBAR
--TG_MAMMIR
--TG_MAMMAR
--TG_FELNOTT
--TG 9
TGL_BAR (Radio 3 base set list)
--TG_GYEREK
--TG_CSAL
--TG_PAPBAR
--TG_MAMBAR
--TG_BARMIR
--TG_BARMAR
TGL_MIR (Radio 4 base set list)
--TG_GYEREK
--TG_CSAL
--TG_PAPMIR
--TG_MAMMIR
--TG_BARMIR
--TG_MIRMAR
TGL_MAR (Radio 5 base set list)
--TG_GYEREK
--TG_CSAL
--TG_PAPMAR
--TG_MAMMAR
--TG_BARMAR
--TG_MIRMAR
TGL_FIGYELES (MONITORING)
--TG_GYEREK
--TG_CSAL
--TG_PAPBAR
--TG_PAPMIR
--TG_PAPMAR
--TG_PAPMAM
--TG_MAMBAR
--TG_MAMMIR
--TG_MAMMAR
--TG_BARMIR
--TG_BARMAR
--TG_MIRMAR
TGL_FELNOTT (Radio 6 base set list)
--TG_FELNOTT (adult)
--TG 9
TGL_FELGYER (adult + child)
--TG_FELNOTT (adult)
--TG_GYEREK (child)
--TG 9
TGL_GYERCSOP ()
--TG_GYEREK
------------------------------------------------- ----------
----- Channels -----
(Radio 4)
...
PMR_3_D 446,03125 TGList TGL_MIR Contact N / A .....
...
...
and logically similar to other radios
(Radio 5)
...
PMR_3_D 446,03125 TGList TGL_MAR Contact N/A .....
...
...
the list is only incidental
I imagined the channel mode, VFO A mode, VFO B mode with three different setting areas.
I thought I could pre-set it on PC or on the radio with Details Rx Grp or left with right selection and # overwriting.
I thought the selected TG group value (12300305 for example) is stored in a separate area of the three modes. And changing it in another area doesn’t knock out the rest.
From an programming point of view, the index you write is understandable.
Although this loses a good DMR user function, which could even be. This DMR is a fast programmable existing group and / or frequency change. Data loss and change is also confusing.
True, I also made a mistake in my mind that dual scan can be used in DMR mode as well
Or at least it was hope.
Thanks for reading!
No criticism of what I wrote!
Constructively, you receive the writing from me!
Maybe this is just a special need for me.
I hope you stayed understandable with the translation!
Regards!
Zsolt