Page 1 of 1
UV380 QuickKeys
Posted: Mon Feb 13, 2023 10:17 am
by OE1MWW
VK3KYY wrote: ↑Mon Feb 13, 2023 9:27 am
Nothing else has changed.
Quick keys are working fine for me, I just tested them, including the new Calibration screen
tried several times, loaded Dec.15 firmware and Feb13 firmware,
I can reproduce this:
- loading firmware Dec. 15:
a.) loading my existent codeplug
b.) clearing by long hold SK2 + 7 - confirmation melody
c.) green, Channel details, green, down to RX frequency
d.) SK2+7, only RX frequency strip in disply, OK below
d.) OK - confirmation melody
RED twice to return
SK2+7 brings channel RX frequency
- loading firmware Feb. 13
same procedure as above
SK2+7 does not react
Re: QuickKeys
Posted: Mon Feb 13, 2023 10:27 am
by VK3KYY
OK
I think there is also problem, on the GD-77 with several of the menu's when using Quickeys
Rx freq appears to work on the GD-77 , but the Language menu no longer seems to work via QuickKeys
Probably we have now exceeded the total number of menu's which the official data storage for quickkeys was designed to handle and some other data storage will be needed.