Arrow down

Post Reply
DO2FN
Posts: 2
Joined: Fri Dec 06, 2019 3:56 pm

Arrow down

Post by DO2FN » Fri Dec 06, 2019 4:00 pm

With the latest Firmware i have the Problem thats the arrow down Key have no function. Install i the Stock Firmware its the Key function.

DL4LEX
Posts: 62
Joined: Sat Nov 16, 2019 3:09 pm

Re: Arrow down

Post by DL4LEX » Fri Dec 06, 2019 4:05 pm

Is the down key complete without function or is it only in specific screens?

PS:
Which commit id? (Menu -> Firmware Info -> [ commit id ])

VK3KYY
Posts: 7579
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Arrow down

Post by VK3KYY » Fri Dec 06, 2019 7:51 pm

Alex. Perhaps this is another keypad problem :-(

DL4LEX
Posts: 62
Joined: Sat Nov 16, 2019 3:09 pm

Re: Arrow down

Post by DL4LEX » Fri Dec 06, 2019 8:41 pm

I hope not:-( I don't like bugs that are only on some devices.

I think I will add a permanent debug info screen to get more data.

VK3KYY
Posts: 7579
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Arrow down

Post by VK3KYY » Fri Dec 06, 2019 8:43 pm

Yes

My dads radio still doesn’t work all the time.

So I was going to write some debug via USB. But a debug screen is a good idea

DL4LEX
Posts: 62
Joined: Sat Nov 16, 2019 3:09 pm

Re: Arrow down

Post by DL4LEX » Fri Dec 06, 2019 8:55 pm

Should we add an option to enable more debug info without needing a special firmware version?
We could use the black button for the info if debug is enabled.

VK3KYY
Posts: 7579
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Arrow down

Post by VK3KYY » Fri Dec 06, 2019 10:03 pm

Add something to the options.

Main version would be OK.

DO2FN
Posts: 2
Joined: Fri Dec 06, 2019 3:56 pm

Re: Arrow down

Post by DO2FN » Fri Dec 06, 2019 10:03 pm

When i go with Green Key in the Menue and i will go down the arrow Key down make some no function.

Its the latest FW from Roger.

VK3KYY
Posts: 7579
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Arrow down

Post by VK3KYY » Fri Dec 06, 2019 10:06 pm

Umm.

Either a pullup resistor or possibly settling time delay problem.

We'll need to do a version without settling time and perhaps also without pullup's, as we don't know precisely which version caused the problem.

If the settling time caused the problem, it means there are deeper problems with the keyboard reading

DL4LEX
Posts: 62
Joined: Sat Nov 16, 2019 3:09 pm

Re: Arrow down

Post by DL4LEX » Fri Dec 06, 2019 10:24 pm

@do0fn

How about the contact list? Does the problem exist there?

Post Reply