OpenGD77

When setting frequency calibration - green key exit, every time I power up the radio I have to re-set it again

KF5MG wrote: ↑

Thu Mar 23, 2023 9:21 pm

When setting frequency calibration - green key exit, every time I power up the radio I have to re-set it again

SK2 + Green to permanently save.

I though this was documented in the User Guide

I have tried that and it does not save the new settings.

Testet on my RT3S and everything is saved and the changed values is kept after power cycle, also tried the "Factory Cal:" that restores the factory setting.

Well, it is not working on my TYT MD UV-390

I have just checked on the MD-UV390 and confirmed that the calibration save is working as intended.

Just for clarity, when on the Calibration screen you need to press and hold the SK2 key (side button marked M), then quickly press and release the Green key, then release the SK2 key. The radio should beep and return to the main screen. If the radio stays on the calibration screen then you are pressing the green key for too long.

Colin G4EML

Ok, the quick green key press did the trick, I guess I was holding it too long. It worked, Thank you.

Glad you got it sorted. The key usage on the radios is getting quite complicated as we add more and more features. Each key can have multiple functions. Short press and long press are treated as different keys.

Colin G4EML