While I was testing firmware 20191208202447[3d77f5b] (next time I will put a screenshot of the display, I promise), I noticed that by receiving a private message the time spent on the display by the message which ask whether to accept it or not is very short when you are operating on a repeater, while in the case of simplex the problem is not there.
I do not know if this thing is related to the type of repeater, as the local one I normally use is BrandMeister and with it I noticed the problem.
Sadly I was not able to do checks with other kinds of repeaters.
Thanks.
73 best regards de Fabio IZ2EIB
The time to accept or reject a private message is too short.
Re: The time to accept or reject a private message is too short.
Yes.
I agree.
The message needs to be retained until the user accepts or rejects. I think currently it gets removed when the next incoming signal is received
I agree.
The message needs to be retained until the user accepts or rejects. I think currently it gets removed when the next incoming signal is received