Can't open squelch with the function key when rx/tx is reversed

[kb7pst]

Problem: I often want to listen to the input frequency of a repeater without the squelch to see if I can hear them. When I reverse the tx/rx frequencies, holding in the function key doesn't open the squelch like it does normally.

Steps to reproduce (tested on the Baofeng DM-1701 with build 2023005092005957)
1. Go to any repeater in the memory (analog or digital).
2. Hold down the "#" key.
Notice -> The title of the repeater goes into reverse video. If I press the key below the PTT, I can confirm that the RX/TX frequencies have been swapped.
3. Hold in the function key.
Notice -> Nothing happens.

[F1RMB]

Hi,

Known problem, next release will have this fixed.


Cheers.
---
Daniel

[kb7pst]

Fantastic! Thanks for the quick feedback!

[kb7pst]

Confirmed that the bug is not reproducable with the newest build. Thanks so much!