Some limitations similar to MD-9600 on the DM-1701 ?
I also noticed something odd.
If I switch to VFO and send a APRS packet I see this on my decoder:
Code: Select all
11:08:51$ fm SA0BUX-7 to APN000-0 via WIDE2-1,1x-12 RR1! PID=38
.34N/01801.56EL OpenGD77
Which I presume is from the default settings.
But if I then switch back from VFO to my defined APRS channel where I have a APRS profile it continues to send with the VFO APRS settings.
Even if I switch between some channels and back to the defined channel.
After power off/on it works again and it sends according to the APRS settings.
Code: Select all
11:20:43$ fm SA0BUX-4 to APN000-0 via WIDE1-1,WIDE2-1 UI PID=F0
!5918.34N/01801.56E4 OpenGD77 DM-1701