OpenGD77

Posted: **Sat Oct 28, 2023 9:34 am**

Hi folks,

First of all thanks to the huge work all developers made.

After some updating an downdating Beta 2023 09 15 and 2023 09 04 trying to trace a sensivity loss during scanning at rev Beta 2023 09 15 firmware, I'm uable to reach the sub menue of display settings anymore e.g. brightness but the others as well, the radio jumps back into VFO/Channel sreen.
E.G
Green => selecting Display Options => Green => selecting Display Brightness => Green => Radio jumps back to VFO/Channel.

Problem presits even donwdating to older software.
This is on two different GD-77

Thanks for helping out.
Additionally this applies to all optoins sub menues

Posted: **Sat Oct 28, 2023 9:56 am**

Hi,

DF9HJ wrote: ↑
Sat Oct 28, 2023 9:34 am
Hi folks,

First of all thanks to the huge work all developers made.

After some updating an downdating Beta 2023 09 15 and 2023 09 04 trying to trace a sensivity loss during scanning at rev Beta 2023 09 15 firmware, I'm uable to reach the sub menue of display settings anymore e.g. brightness but the others as well, the radio jumps back into VFO/Channel sreen.
E.G
Green => selecting Display Options => Green => selecting Display Brightness => Green => Radio jumps back to VFO/Channel.

Problem presits even donwdating to older software.
This is on two different GD-77

Thanks for helping out.
Additionally this applies to all optoins sub menues

That never worked like that, never.
Select the options you want to change (e.g. "Brightness", and use Left/Right or rotary (depending on the transceiver model) to change the value.
Press GREEN to validate that change(s), then it will get back to Channel/VFO screen.

Posted: **Sat Oct 28, 2023 11:45 am**

Thanks,

I was totally misled, dont know why, too much red win yesterday.....
Sorry for bothering.

73 Jens

OpenGD77

Display Menue

Display Menue

Re: Display Menue

Re: Display Menue