Hotspot freezes with TG0 in Display

Post Reply
DC7JZB
Posts: 13
Joined: Wed Nov 20, 2019 10:18 pm

Hotspot freezes with TG0 in Display

Post by DC7JZB » Wed Dec 18, 2019 9:31 pm

After a couple of minutes, the Hotspot freezes and Shows TG 0 in Display.
If I Transmit with a second Radio, the TG 0 goes away, but there is no other reaction from the Hotspot.

If I try to Restart the MMDVMHost it doesn't find the GD77 anymore writes "can't read Firmware after 6 attempts" and Closes.
If I Restart the GD77 and try to Restart MMDVMHost after it again it has no function, I have to Restart the GD77 AND the Raspberry Pi.

Other Modems (DV-Mega & HS_Dual_Hat) run fine over Hours with the same Installation on this Raspberry Pi (Raspberry Pi Zero WH).
Tried it with Pi-Star, but I had the same Result.

VK3KYY
Posts: 7490
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Hotspot freezes with TG0 in Display

Post by VK3KYY » Wed Dec 18, 2019 9:47 pm

This is a known bug, which has already been reported.

Hotspot mode in the Tier2 version is not stable yet.

Use the old Tier1 firmware if you need to use hotspot mode

Post Reply