Page 1 of 1

Hotspot freezes with TG0 in Display

Posted: Wed Dec 18, 2019 9:31 pm
by DC7JZB
After a couple of minutes, the Hotspot freezes and Shows TG 0 in Display.
If I Transmit with a second Radio, the TG 0 goes away, but there is no other reaction from the Hotspot.

If I try to Restart the MMDVMHost it doesn't find the GD77 anymore writes "can't read Firmware after 6 attempts" and Closes.
If I Restart the GD77 and try to Restart MMDVMHost after it again it has no function, I have to Restart the GD77 AND the Raspberry Pi.

Other Modems (DV-Mega & HS_Dual_Hat) run fine over Hours with the same Installation on this Raspberry Pi (Raspberry Pi Zero WH).
Tried it with Pi-Star, but I had the same Result.

Re: Hotspot freezes with TG0 in Display

Posted: Wed Dec 18, 2019 9:47 pm
by VK3KYY
This is a known bug, which has already been reported.

Hotspot mode in the Tier2 version is not stable yet.

Use the old Tier1 firmware if you need to use hotspot mode