Distance display is wrong after quitting scan
Posted: Thu Mar 21, 2024 8:59 pm
I have a Retevis RT3S running OpenGD77 build 20240412163717
The active zone contains only channels that have latitude and longitude values. "Show dist" is On in Options -> Display options. If I run a scan by pressing and holding the up arrow, then quit the scan with the red or green buttons, the distance displayed is the distance for the channel active before the scan started, not the channel active after quitting the scan. As soon as I turn the encoder to select another channel, the correct distance is displayed.
It looks like a stale distance value is being displayed when quitting the scan.
The active zone contains only channels that have latitude and longitude values. "Show dist" is On in Options -> Display options. If I run a scan by pressing and holding the up arrow, then quit the scan with the red or green buttons, the distance displayed is the distance for the channel active before the scan started, not the channel active after quitting the scan. As soon as I turn the encoder to select another channel, the correct distance is displayed.
It looks like a stale distance value is being displayed when quitting the scan.