OpenRD5R: TX issue on repeater (DMR)
OpenRD5R: TX issue on repeater (DMR)
Hello
I found an issue concerning the OpenRD5R: when trying to activate a closed DMR-repeater, I have to press the PTT twice or sometime more often until the "beep" is audible so I can start talking. I tried calibrating and also used calibration files which I found here in the forum, but it stays the same.
Sometimes, after not being able to start TXing on the repeater, the screen freezes and this could only be changed by rebooting the device.
On DMR simplex frequencies, all is ok.
Thanks in advance!
Vy73 de Ingo, DB4BIN
I found an issue concerning the OpenRD5R: when trying to activate a closed DMR-repeater, I have to press the PTT twice or sometime more often until the "beep" is audible so I can start talking. I tried calibrating and also used calibration files which I found here in the forum, but it stays the same.
Sometimes, after not being able to start TXing on the repeater, the screen freezes and this could only be changed by rebooting the device.
On DMR simplex frequencies, all is ok.
Thanks in advance!
Vy73 de Ingo, DB4BIN
Re: OpenRD5R: TX issue on repeater (DMR)
This may be fixed in the next version because by the calibration table fix
Re: OpenRD5R: TX issue on repeater (DMR)
Try the latest "Development" version of the firmware
https://github.com/rogerclarkmelbourne/ ... enRD5R.sgl
https://github.com/rogerclarkmelbourne/ ... enRD5R.sgl
Re: OpenRD5R: TX issue on repeater (DMR)
Hi Roger, thanks for you efforts.
Unfortunately, with this FW-version there is absolutely no connection possible to the repeater. I downgraded to the previous version and it is working again after pressing the PTT two times.
The distance to the repeater is around 5km and it is a DMR+ - repeater. Unfortunately, there are no Brandmeister-repeater in a (for a handheld radio) reachable distance.
Greetings from germany
Vy73 de Ingo, DB4BIN
Unfortunately, with this FW-version there is absolutely no connection possible to the repeater. I downgraded to the previous version and it is working again after pressing the PTT two times.
The distance to the repeater is around 5km and it is a DMR+ - repeater. Unfortunately, there are no Brandmeister-repeater in a (for a handheld radio) reachable distance.
Greetings from germany
Vy73 de Ingo, DB4BIN
Re: OpenRD5R: TX issue on repeater (DMR)
Hi Roger,
sorry, but still no connection when repeater is closed.
Vy73 de Ingo, DB4BIN
sorry, but still no connection when repeater is closed.
Vy73 de Ingo, DB4BIN