Firmware-Uploader: Remember last directory

OpenGD77CPS
Post Reply
DG3GSP
Posts: 153
Joined: Sun Nov 17, 2019 9:30 am
Location: Southern Germany

Firmware-Uploader: Remember last directory

Post by DG3GSP » Sun Nov 17, 2019 12:54 pm

I like the Firmware Loader (in the extras menu) in the Community CPS, but I have a feature request:

Is it possible to remember the last directory for the open-dialogue (for the .sgl -file) ?

That would be a litte help for frequently firmware uploads at the tests.

73, Peter DG3GSP

VK3KYY
Posts: 7486
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Firmware-Uploader: Remember last directory

Post by VK3KYY » Sun Nov 17, 2019 8:18 pm


VK3KYY
Posts: 7486
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Firmware-Uploader: Remember last directory

Post by VK3KYY » Thu Nov 21, 2019 9:30 am

Try this version

https://drive.google.com/open?id=1kzPgR ... dFFCaj-O-O

It also has some other changes to allow manual selection of Com port if the OpenGD77 port can't be found

User avatar
m1dyp
Posts: 601
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: Firmware-Uploader: Remember last directory

Post by m1dyp » Thu Nov 21, 2019 9:53 am

hi, seems to be ok here :mrgreen:

VK3KYY
Posts: 7486
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Firmware-Uploader: Remember last directory

Post by VK3KYY » Thu Nov 21, 2019 10:04 am

Thanks

User avatar
IZ1HVD
Posts: 7
Joined: Mon Nov 18, 2019 9:03 am
Location: Piedmont Region, Northwest Italy
Contact:

Re: Firmware-Uploader: Remember last directory

Post by IZ1HVD » Thu Nov 21, 2019 1:29 pm

Thanks Roger! ;)

DG3GSP
Posts: 153
Joined: Sun Nov 17, 2019 9:30 am
Location: Southern Germany

Re: Firmware-Uploader: Remember last directory

Post by DG3GSP » Thu Nov 21, 2019 3:33 pm

Works good - Thanks !

VK3KYY
Posts: 7486
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: Firmware-Uploader: Remember last directory

Post by VK3KYY » Thu Nov 21, 2019 8:03 pm

Ok

I will update Github with this version

Post Reply