GD-77 programming with Windows 11
GD-77 programming with Windows 11
I need help please. I can NOT read/write my GD-77 using windows 11. Apparently Windows 11 no longer supports the programming cable that came with the radio. I've tried everything I can find on the internet but have not found a working solution. Does anyone know of a solution or a "workaround" for this problem? Your help greatly appreciated. Looked up a replacement cable on Radioddity website but the cable is "Discontinued".
Gary
Gary
Re: GD-77 programming with Windows 11
Are you using the OpenGD77 firmware or the manufacturers firmware? The USB drivers are different and so will be the answers.
The cable is just that, a cable, there is no electronics in it, so there is no way a different cable would make any difference. (assuming it is not physically damaged).
I don't have a windows 11 PC, maybe someone else can comment if they have it working.
Colin G4EML
The cable is just that, a cable, there is no electronics in it, so there is no way a different cable would make any difference. (assuming it is not physically damaged).
I don't have a windows 11 PC, maybe someone else can comment if they have it working.
Colin G4EML
Re: GD-77 programming with Windows 11
![Embarrassed :oops:](./images/smilies/icon_redface.gif)
Re: GD-77 programming with Windows 11
Opengd77 works fine with Windows 11
I don't know whether the official firmware loader or CPS works with W11
I don't know whether the official firmware loader or CPS works with W11
Re: GD-77 programming with Windows 11
73!
I use win11 22h2 and I don't have problems with com driver, the latest cps works, pc can communicate with radio gd77.
I use win11 22h2 and I don't have problems with com driver, the latest cps works, pc can communicate with radio gd77.
Re: GD-77 programming with Windows 11
I am using korean windows 11
Can't communicate with opengd77 device in Korean windows 11
However, it works fine in English Windows 10 or 11 without any problem.
*: my call sign is DS5HDN
Can't communicate with opengd77 device in Korean windows 11
However, it works fine in English Windows 10 or 11 without any problem.
*: my call sign is DS5HDN
Last edited by DS5HDN on Sat Oct 29, 2022 4:05 am, edited 1 time in total.
Re: GD-77 programming with Windows 11
What is your callsigngtgenter wrote: ↑Fri Oct 28, 2022 7:10 pmI need help please. I can NOT read/write my GD-77 using windows 11. Apparently Windows 11 no longer supports the programming cable that came with the radio. I've tried everything I can find on the internet but have not found a working solution. Does anyone know of a solution or a "workaround" for this problem? Your help greatly appreciated. Looked up a replacement cable on Radioddity website but the cable is "Discontinued".
Gary
Re: GD-77 programming with Windows 11
What is your callsign?easternwind wrote: ↑Sat Oct 29, 2022 1:11 amI am using korean windows 11
Can't communicate with opengd77 device in Korean windows 11
However, it works fine in English Windows 10 or 11 without any problem.
Re: GD-77 programming with Windows 11
![Wink ;)](./images/smilies/icon_e_wink.gif)
Re: GD-77 programming with Windows 11
I am using opengd77 firmware. Opengd77 cps (latest version) runs fine but I can't read or write the radio. I select the correct com port but it fails to connect. Thank you for your's (and everybody's) replies. I'll keep plugging away at it.G4EML wrote: ↑Fri Oct 28, 2022 7:45 pmAre you using the OpenGD77 firmware or the manufacturers firmware? The USB drivers are different and so will be the answers.
The cable is just that, a cable, there is no electronics in it, so there is no way a different cable would make any difference. (assuming it is not physically damaged).
I don't have a windows 11 PC, maybe someone else can comment if they have it working.
Colin G4EML