New Beta version 2022 11 26
New Beta version 2022 11 26
New Beta version with changes to the DMR APRS transmission
In the last version DMR APRS transmission required the Talker Alais text to also be sent.
In this version Talker Alias transmission control has been removed from the Radio Options, and is now 'Per channel', in that you need to enable Talker Alias or DMR APRS transmission on the channel and Timeslot
Options for TA transmission are
Off, APRS, Text, Both (APRS & Text)
downloads/GD77/e280321051839f55d633c9f921daa9faa3fbceb6
downloads/GD77/Latest
CPS has been updated to support this change to the channel details.
https://opengd77.com/downloads/CPS/Late ... .25.02.exe
Voice prompts have also been updated to support this version
downloads/Voice_Prompts/latest/
Translation files will be posted soon.
In the last version DMR APRS transmission required the Talker Alais text to also be sent.
In this version Talker Alias transmission control has been removed from the Radio Options, and is now 'Per channel', in that you need to enable Talker Alias or DMR APRS transmission on the channel and Timeslot
Options for TA transmission are
Off, APRS, Text, Both (APRS & Text)
downloads/GD77/e280321051839f55d633c9f921daa9faa3fbceb6
downloads/GD77/Latest
CPS has been updated to support this change to the channel details.
https://opengd77.com/downloads/CPS/Late ... .25.02.exe
Voice prompts have also been updated to support this version
downloads/Voice_Prompts/latest/
Translation files will be posted soon.
Re: New Beta version 2022 11 26
thank you
Re: New Beta version 2022 11 26
firmware loaded ok, but... now i cannot connect to radio for voice prompts etc, message says error connecting to radio, tried rolling back firmware, still unable to connect but com port shows radio is there, just no connection, rolled back cps too, still nothing, any ideas please
Re: New Beta version 2022 11 26
Did you try rebooting your PCm1dyp wrote: ↑Fri Nov 25, 2022 9:40 pmfirmware loaded ok, but... now i cannot connect to radio for voice prompts etc, message says error connecting to radio, tried rolling back firmware, still unable to connect but com port shows radio is there, just no connection, rolled back cps too, still nothing, any ideas please
Re: New Beta version 2022 11 26
thanks all works fine
Moving the TA settings to the channel menu is a good choice
Moving the TA settings to the channel menu is a good choice
Re: New Beta version 2022 11 26
I found that one of the 'flag' bytes in the channel data, was for system called ARTS, which I don't think Ham radio uses at all, and appeared always to be zero, hence I was able to use that data area for this feature.
Re: New Beta version 2022 11 26
yes, problem still remainsVK3KYY wrote: ↑Fri Nov 25, 2022 9:47 pmDid you try rebooting your PCm1dyp wrote: ↑Fri Nov 25, 2022 9:40 pmfirmware loaded ok, but... now i cannot connect to radio for voice prompts etc, message says error connecting to radio, tried rolling back firmware, still unable to connect but com port shows radio is there, just no connection, rolled back cps too, still nothing, any ideas please
Re: New Beta version 2022 11 26
Ummm.m1dyp wrote: ↑Sat Nov 26, 2022 5:35 amyes, problem still remainsVK3KYY wrote: ↑Fri Nov 25, 2022 9:47 pmDid you try rebooting your PCm1dyp wrote: ↑Fri Nov 25, 2022 9:40 pmfirmware loaded ok, but... now i cannot connect to radio for voice prompts etc, message says error connecting to radio, tried rolling back firmware, still unable to connect but com port shows radio is there, just no connection, rolled back cps too, still nothing, any ideas please
Can you describe what you mean by no connection?
Did you accidently re-install the driver ?
Re: New Beta version 2022 11 26
a message in the cps says no connection , i tried reinstalling comport driver, still shows up as com6 in device manager but cps wont read radio
Re: New Beta version 2022 11 26
when does the message occur
can you screengrab the message, as I can't find anywhere in the CPS that contains the text "no connection"
Did you try resetting the settings?
can you screengrab the message, as I can't find anywhere in the CPS that contains the text "no connection"
Did you try resetting the settings?