BTW. Its not practical to add voice to the battery history graph which is on the third / last screen.F1RMB wrote: ↑Wed Dec 30, 2020 9:10 pmOK1TE wrote: ↑Wed Dec 30, 2020 9:07 pmCSS voice follow-on is back and I've noticed some other improvements, thank you again.
Just a detail. I don't know, how the Radio Information screen looks like, but according the voice prompts there are three pages (when arrowing through): battery Status, temperature and battery status again.
Does this correspond with the visual presentation?
Yes, the first battery is the one with voltage and percentage, the third one is battery voltage history.
Cheers.
---
Daniel
New ongoing "Development" version has been created
Re: New ongoing "Development" version has been created
Re: New ongoing "Development" version has been created
I've released a new Development version, which has a number of bug fixes.
For the full details see
https://github.com/rogerclarkmelbourne/ ... 1.01.19.01
There is also an update voice prompt file, however its not essential to update the voice prompts, as the existing prompts should work with this firmware version
https://github.com/LibreDMR/voice-promp ... 1.01.19.01
For the full details see
https://github.com/rogerclarkmelbourne/ ... 1.01.19.01
There is also an update voice prompt file, however its not essential to update the voice prompts, as the existing prompts should work with this firmware version
https://github.com/LibreDMR/voice-promp ... 1.01.19.01
Re: New ongoing "Development" version has been created
Thanks Daniel and Colin
ciao Roger
ciao Roger
Re: New ongoing "Development" version has been created
Bonjour et merci
Re: New ongoing "Development" version has been created
All looks great with the latest updates and tweeks,
The squelch with, and with out RX CTCSS works 100%.
So far all menus and DMR are working ok.
The squelch with, and with out RX CTCSS works 100%.
So far all menus and DMR are working ok.
Re: New ongoing "Development" version has been created
Hello everyone.
Only happens to my GD-77?.
I just updated and in memory mode, dmr channel, it remains in the same slot.
Channel 1 (slot 1)
Channel 2 (slot 2)
If I change memory channel 1 to memory channel 2, my gd-77 remains same slot.
if I change it through the "*" key, it changes slot
(TS filter is on).
Thanks
73 EC7AJT Juan
Only happens to my GD-77?.
I just updated and in memory mode, dmr channel, it remains in the same slot.
Channel 1 (slot 1)
Channel 2 (slot 2)
If I change memory channel 1 to memory channel 2, my gd-77 remains same slot.
if I change it through the "*" key, it changes slot
(TS filter is on).
Thanks
73 EC7AJT Juan
Re: New ongoing "Development" version has been created
Hi,
Remove the TS override (long press '*').
Cheers.
---
Daniel
EC7AJT wrote: ↑Tue Jan 19, 2021 5:40 pmHello everyone.
Only happens to my GD-77?.
I just updated and in memory mode, dmr channel, it remains in the same slot.
Channel 1 (slot 1)
Channel 2 (slot 2)
If I change memory channel 1 to memory channel 2, my gd-77 remains same slot.
if I change it through the "*" key, it changes slot
(TS filter is on).
Thanks
73 EC7AJT Juan
Remove the TS override (long press '*').
Cheers.
---
Daniel
Re: New ongoing "Development" version has been created
Yes, now It changes slot.F1RMB wrote: ↑Tue Jan 19, 2021 6:44 pmHi,
EC7AJT wrote: ↑Tue Jan 19, 2021 5:40 pmHello everyone.
Only happens to my GD-77?.
I just updated and in memory mode, dmr channel, it remains in the same slot.
Channel 1 (slot 1)
Channel 2 (slot 2)
If I change memory channel 1 to memory channel 2, my gd-77 remains same slot.
if I change it through the "*" key, it changes slot
(TS filter is on).
Thanks
73 EC7AJT Juan
Remove the TS override (long press '*').
Cheers.
---
Daniel
Thanks Daniel