New ongoing "Development" version has been created
Re: New ongoing "Development" version has been created
Nice addition the monitor mode, but is it also possible to switch the monitor mode on and off in the menu?
That the monitor mode can also remain on when you scan all channels.
That the monitor mode can also remain on when you scan all channels.
Re: New ongoing "Development" version has been created
You can disable the DMR filters, but not get the full functionality of monitor mode.
And, Monitor mode needs more work because there are still problems receiving a duplex DMR signal, if the radio is scanning, as the DMR handling mode is controlled by whether the Tx and Rx frequencies are the same or different.
Actually probably the DMR reception as a whole needs to be overhauled to overcome this problem, but its a non trivial amount of work.
Re: New ongoing "Development" version has been created
I've removed the last minor update / attempt to completely hold off the QSO Data display (callsign display), but I have retained the original function I added, which sometimes holds off for 2 seconds.
These files are in the same location as before
https://drive.google.com/drive/folders/ ... sp=sharing
I've also modified the TS override system, so the TS override is not cleared every time the TG, or Channel or Zone is changed.
And the TG override is also not cleared when you change Zone.
If this version appears to be relatively stable I'll update the Unstable / Development files with this version.
I'll also continue to investigate how to resolve the problem of the QSO display updating when it does not need to, (overwriting the TG display).
There also appear to be some instances where the QSO display remains on the screen after the Rx signal has ended. This problem is in the firmware prior to my latest changes and also needs to be investigated
These files are in the same location as before
https://drive.google.com/drive/folders/ ... sp=sharing
I've also modified the TS override system, so the TS override is not cleared every time the TG, or Channel or Zone is changed.
And the TG override is also not cleared when you change Zone.
If this version appears to be relatively stable I'll update the Unstable / Development files with this version.
I'll also continue to investigate how to resolve the problem of the QSO display updating when it does not need to, (overwriting the TG display).
There also appear to be some instances where the QSO display remains on the screen after the Rx signal has ended. This problem is in the firmware prior to my latest changes and also needs to be investigated
Re: New ongoing "Development" version has been created
I'm testing this version, thanks RogerVK3KYY wrote: ↑Wed Oct 14, 2020 1:47 amI've removed the last minor update / attempt to completely hold off the QSO Data display (callsign display), but I have retained the original function I added, which sometimes holds off for 2 seconds.
These files are in the same location as before
https://drive.google.com/drive/folders/ ... sp=sharing
I've also modified the TS override system, so the TS override is not cleared every time the TG, or Channel or Zone is changed.
And the TG override is also not cleared when you change Zone.
If this version appears to be relatively stable I'll update the Unstable / Development files with this version.
I'll also continue to investigate how to resolve the problem of the QSO display updating when it does not need to, (overwriting the TG display).
There also appear to be some instances where the QSO display remains on the screen after the Rx signal has ended. This problem is in the firmware prior to my latest changes and also needs to be investigated
ciao
Re: New ongoing "Development" version has been created
Hi Sal
Thanks
I've actually decided to update the Unstable version, because I know some other people who had problems with the TS override being cleared.,
If you find any major problems I will restore the Unstable to the previous Unstable files
Thanks again
Roger
Thanks
I've actually decided to update the Unstable version, because I know some other people who had problems with the TS override being cleared.,
If you find any major problems I will restore the Unstable to the previous Unstable files
Thanks again
Roger
Re: New ongoing "Development" version has been created
The Development version has been updated with a bug fix, from Daniel F1RMB, to resolve a bug which occurs if the codeplug only contains 1 contact
https://github.com/rogerclarkmelbourne/ ... 2020.10.10
https://github.com/rogerclarkmelbourne/ ... 2020.10.10
Re: New ongoing "Development" version has been created
I've created a new Development release which includes the addition feature where a new channel created on the VFO screen is added to the current zone for the Channel screen
I've also done some bug fixes in relation to DMR TS in the existing code, so that the newly created channel has the correct TS.
https://github.com/rogerclarkmelbourne/ ... 2020.10.16
I've also done some bug fixes in relation to DMR TS in the existing code, so that the newly created channel has the correct TS.
https://github.com/rogerclarkmelbourne/ ... 2020.10.16
Re: New ongoing "Development" version has been created
you are faster to implement the functions than I to install themVK3KYY wrote: ↑Thu Oct 15, 2020 10:11 pmI've created a new Development release which includes the addition feature where a new channel created on the VFO screen is added to the current zone for the Channel screen
I've also done some bug fixes in relation to DMR TS in the existing code, so that the newly created channel has the correct TS.
https://github.com/rogerclarkmelbourne/ ... 2020.10.16
Ciao Roger