Page 9 of 69
Re: New ongoing "Development" version has been created
Posted: Sun Jul 19, 2020 6:26 am
by VK3KYY
I've updated the Development version.
The Changes are
* Possible fix for DTMF and 1750Hz deviation (under deviation) problem (still needs to be verified by DG3GSP)
* Fix for TS override in Contacts not being honoured when Contact is selected by ### on the Channel or VFO screen, or from the Contacts menu -> Contacts List.
Re: New ongoing "Development" version has been created
Posted: Sun Jul 19, 2020 12:08 pm
by m1dyp
thank you
Re: New ongoing "Development" version has been created
Posted: Mon Jul 20, 2020 5:11 am
by W1CY
VK3KYY wrote: ↑Sun Jul 19, 2020 6:26 am
I've updated the Development version.
The Changes are
* Possible fix for DTMF and 1750Hz deviation (under deviation) problem (still needs to be verified by DG3GSP)
* Fix for TS override in Contacts not being honoured when Contact is selected by ### on the Channel or VFO screen, or from the Contacts menu -> Contacts List.
Thanks, I have already loaded the latest dev version to both of my GD-77s.
Re: New ongoing "Development" version has been created
Posted: Tue Jul 21, 2020 11:52 am
by VK3KYY
The development version has been updated to split the DMR filtering into 3 separate filters
Colour Code
TimeSlot
DMR destination filter i.e None, TG, RxG or Ct (Contact)
This is to allow any destination filter to be applied even if the TimeSlot or Colour Code filter is not applied
Voice prompts have been updated to correspond with this change.
The User Guide has not been updated yet (because I've not had time)
Re: New ongoing "Development" version has been created
Posted: Tue Jul 21, 2020 12:28 pm
by m1dyp
thank you
Re: New ongoing "Development" version has been created
Posted: Tue Jul 21, 2020 4:13 pm
by Ik0nwg
VK3KYY wrote: ↑Tue Jul 21, 2020 11:52 am
The development version has been updated to split the DMR filtering into 3 separate filters
Colour Code
TimeSlot
DMR destination filter i.e None, TG, RxG or Ct (Contact)
This is to allow any destination filter to be applied even if the TimeSlot or Colour Code filter is not applied
Voice prompts have been updated to correspond with this change.
The User Guide has
not been updated yet (because I've not had time)
very useful update, thanks Roger
ciao
Re: New ongoing "Development" version has been created
Posted: Tue Jul 21, 2020 4:32 pm
by DO4CZ
Yes it is
!
Thanks for the update, Roger!
Re: New ongoing "Development" version has been created
Posted: Tue Jul 21, 2020 7:35 pm
by kt4lh
VK3KYY wrote: ↑Tue Jul 21, 2020 11:52 am
The development version has been updated to split the DMR filtering into 3 separate filters
Colour Code
TimeSlot
DMR destination filter i.e None, TG, RxG or Ct (Contact)
This is to allow any destination filter to be applied even if the TimeSlot or Colour Code filter is not applied
Voice prompts have been updated to correspond with this change.
The User Guide has
not been updated yet (because I've not had time)
This is terrific, I've long thought it'd be great for these to be broken out into individual flags or such but didn't want to press my luck at the time it was getting done at all
I will try this out today.
Re: New ongoing "Development" version has been created
Posted: Tue Jul 21, 2020 10:10 pm
by VK3KYY
Its not completely individual flags
The Destination ID / Group is still a list options, ie you can't filter on just the current TG and your private contracts.
But the change serves the purpose I need to listen on both TS but filter on private contacts
Re: New ongoing "Development" version has been created
Posted: Wed Jul 22, 2020 7:51 am
by VK3KYY
Development version has been updated to fix a boot loop problem caused if boot melody notes of very high pitch. Greater than note value 47 were used.
New note pitches have been added to note value 63 and note values are now checked before they are played.
If a not value higher than 63 is used, then the note will be changed to note 63.