CPS Update

OpenGD77CPS
Post Reply
User avatar
OK2HAD
Posts: 52
Joined: Wed Jan 08, 2020 1:10 pm
Location: Uherský Brod (Czech Republic)

Re: CPS Update

Post by OK2HAD » Mon Oct 05, 2020 8:02 am

Hi, can I request the original file in English? I will try to translate it into Czech. Where is a translation needed? After the text "ID" and "TEXT"?

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: CPS Update

Post by VK3KYY » Mon Oct 05, 2020 9:12 am

Files are actually installed into the languages sub folder , so look where the exe is installed, then look in the languages folder

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: CPS Update

Post by VK3KYY » Wed Oct 07, 2020 9:31 am

I've released a new CPS version to add control of the DTMF Tail, and which also fixes a few other minor bugs.

See.

https://github.com/rogerclarkmelbourne/ ... 2020.10.07

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: CPS Update

Post by VK3KYY » Wed Oct 14, 2020 9:36 am

I new CPS version is available, which fixes 2 small problems which people have noticed

* Channel names can now contain 16 characters instead of 15.
* After creating a new channel by right clicking on the Channels tree node, the correct / newly created channel is opened.

See

https://github.com/rogerclarkmelbourne/ ... 2020.10.14

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: CPS Update

Post by VK3KYY » Fri Oct 16, 2020 4:41 am

The CPS has been updated

https://github.com/rogerclarkmelbourne/ ... 2020.10.16



Changes since last version

Removed "Download contacts" screen, as this was a legacy screen from the "Community CPS" used to support the official firmware where the DMR ID system could only store 8 characters.

Set the "Digital contact" of a channel to "N/A" if a TG List is assigned to a channel as the firmware ignores the Digital Contact if a TG List is assigned, and it was causing confusion with users , when this was set to a value.

Some text changes to better explain the operation, of individual functions, including download of the callsign DMR ID database.

Note. The operator can change the value and close the channel screen, and this will save the Digital Contact value, but it will be set to N/A again if the same channel is viewed again.

Note.
This is the same exe as I did a pre-release of yesterday, and several people tested for me.

IU8OGE
Posts: 65
Joined: Tue Sep 29, 2020 3:35 pm

Re: CPS Update

Post by IU8OGE » Fri Oct 16, 2020 9:36 am

what function have the menu setting/Signaling

1) Signaling System
2) Emergency System ?

Thanks

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: CPS Update

Post by VK3KYY » Fri Oct 16, 2020 9:44 am

tangogc wrote:
Fri Oct 16, 2020 9:36 am
what function have the menu setting/Signaling

1) Signaling System
2) Emergency System ?

Thanks

Emergency System menu is no longer in the CPS. It was removed several months ago

Re: Signalling System menu.
This is a bug. There should not be a menu for this. I will remove it

VK3KYY
Posts: 7478
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: CPS Update

Post by VK3KYY » Fri Oct 16, 2020 10:13 am

OK.

The offending items now been removed from the "Settings" menu ;-)

IU8OGE
Posts: 65
Joined: Tue Sep 29, 2020 3:35 pm

Re: CPS Update

Post by IU8OGE » Fri Oct 16, 2020 10:44 am

may I alredy download this update version ?

User avatar
m1dyp
Posts: 601
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: CPS Update

Post by m1dyp » Fri Oct 16, 2020 11:53 am

the Development release on 16th October of the cps has the fixes

Post Reply